Case Studies & Field Reports

New IBC has a ‘silver lining'

Replacing intermediate bulk container and liner keeps waste at a minimum for Dr Pepper.

Tyrone Williams and Ralph Brown, compounders at Dr Pepper, check out contents of the Guardian form-fitted liner inside a Buckhorn Citadel IBC. Source: Grayling.


Batch mixing, used throughout the food and beverage industries worldwide, is a combination of both technology and art. To meet demand, proper equipment must be in place to smoothly produce product. To consistently deliver a unique taste known and loved by millions of consumers requires certain alchemy. Additionally, when the product in question is Dr Pepper, made from a unique blend of 23 different flavors, the blending of ingredients must run efficiently, to keep productivity high and waste to a minimum.

The concentrate for Dr Pepper is produced in St. Louis, MO, where some ingredients are received in food grade totes or bulk bags until they are mixed. These large bags hold up to 300 gallons or 3,000 pounds, and are referred to as intermediate bulk containers (IBCs). For years, Dr Pepper had used a European designed, rubberized, nylon impregnated bag in an open metal frame for a liquid ingredient. According to Tyrone Williams, a lead compounder at Dr Pepper, the “bladder” totes, as they were called, were difficult to work with. “We couldn’t see into the tote to know the exact volume,” Williams said, “and the system was a little too tall to be able to access it the way we need to.” The inability to see the product meant a lot of guesswork in knowing when the tote was full, and just as much guesswork when emptying the tote.

One of its material suppliers, Univar, informed Dr Pepper’s purchasing department that the bladder manufacturer was discontinuing the liners used in the rubberized totes. Dr Pepper, knowing the limitations of the tote system it had been using, and understanding the problems the compounders had been having with the system, saw an opportunity to improve the process. Dr Pepper asked its long-time supplier to replace the “bladder” system in a way that wouldn’t require re-tooling the production line. The supplier had recommended using a liner from Grayling Industries, but when Grayling heard that Dr Pepper was open to a new system, it contacted Univar and suggested another option.

Grayling specializes in industrial custom-fitted Guardian liners and spent time with Univar to understand the system Dr Pepper was using. Having experience with various IBCs, Grayling recommended that Univar and Dr Pepper look at the Buckhorn Citadel IBC. The low profile, collapsible, 300-gallon container made from molded plastic is durable and stackable, all of which met Dr Pepper’s requirements. Meanwhile, Grayling worked with Univar to develop a food grade, form-fitted, 3-ply polyethylene liner to fit the Buckhorn container.

Tyrone Williams and Ralph Brown, the lead compounders, were enthused about the new system. “We can finally see the volume easily in the tote,” Williams said, “It’s much more efficient and speeds the process. No more guesswork.”

According to Brown, “It’s easy to pull the liner over and get all the material out. There’s very little waste because it’s form-fitted; no creases or folds trap the product.”

The container and liner work seamlessly with Dr Pepper’s existing equipment. According to the manufacturing team, the new system is lower and allows for easier access, reducing any potential ergonomic issues.

For more information, Ben Greene, 770-751-9095 ext. 121, ben@graylingindustries.com.

Did you enjoy this article? Click here to subscribe to Food Engineering Magazine.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

Food Engineering's Food Automation & Manufacturing Conference and Expo 2015

Images from Food Engineering's Food Automation & Manufacturing Conference and Expo in Clearwater Beach, Florida, April 12-15, 2015. The event brought food and beverage processors and suppliers together to gain valuable information on the latest trends and technologies in manufacturing, automation, sustainability and food safety.

Podcasts

Burns & McDonnell project manager RJ Hope and senior project engineer Justin Hamilton discuss the distinctions between Food Safety and Food Defense as well as the implications for food manufacturers of the Food Safety Modernization Act.
More Podcasts

Food Engineering

Food Engineering May 2015 Cover

2015 May

The May 2015 issue of Food Engineering explores effective tools for hitting manufacturing targets. Also, read how processors are looking for faster ways to detect harmful pathogens in food and beverages without sacrificing accuracy or reliability.

Table Of Contents Subscribe

Plant Facility/Site Issues

What issue about your current plant facility/site keeps you up the most at night?
View Results Poll Archive

THE FOOD ENGINEERING STORE

Food-Authentication-Flyer-(.gif
Food Authentication Using Bioorganic Molecules

This text provides critical tools and data needed to augment routine food analysis and enhance food safety by aiding in the detection of counterfeit, and potentially deleterious, foods.

More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

STAY CONNECTED

FE recent tweets

facebook_40.pngtwitter_40px.pngyoutube_40px.png linkedin_40px.pngGoogle +

Food Master

Food Engineering Food Master 2015Food Master 2015 is now available!

Where the buying process begins in the food and beverage manufacturing market. 

Visit www.foodmaster.com to learn more.