April 1, 2009
Microfluidics’ M-110P-20, M-110P-20S and M-110PS bench-top processors require no compressed air or cooling water for hydraulics; the units require only a standard 20 amp single-phase electrical outlet. The processors allow flow rates starting at 110ml/min. (95ml/min. for CE versions) depending on process pressure. All results are scalable to pilot and/or production volumes. The M-110P-20 processor operates at a lower pressure and is able to deliver nanoemulsions, nanosuspensions, nanoencapsulations and nanodispersions at 20,000psi or lower, and works with a 50ml minimum sample size. The M-110PS and M-110P-20S processors work with smaller minimum sample sizes of 25ml.
Microfluidics; 800-370-5452; www.microfluidicscorp.com