Food Safety / Processing / Columns

Food Safety: Ode to the pallet

Keep an eye on one of the least considered plant tools. It could make a huge difference in your food safety plan.

One of the least respected but most important tools for smooth food plant operation is the pallet. It brings in ingredients, raw materials and packaging materials; it moves things around the plant and finished goods out. Yet, in the hundreds of food plants I’ve visited, only a handful had a documented pallet management program. Pallet management should consist of the following elements: specifications, storage, inspection, use within and outside the plant, maintenance, shipping requirements and cleaning.

If you store pallets outside, ensure they’re covered with an overhang and placed on rails or blocks a minimum of six inches above the ground since storing them on the ground allows those on the bottom to get wet and allow insects easy access. In addition, pallets should never be stored against walls either indoors or outside. Plus, don’t store pallets, which can harbor pests, close to access points.

In production environments, pallets should be individually inspected before being brought into the warehouse or production area, especially when they’re stored outside.  Many users equip the inspection area with compressed air hoses that allow the operator to remove pests and dirt. In addition, the inspection step must ensure pallets are in good condition. Any pallets that are splintered or have broken boards or loose nails should be set aside for repair or recycling.

 A pallet management program should define how pallets are cleaned and/or repaired. If plastic pallets are used, they should be washed according to the master cleaning schedule or more frequently if they’re badly soiled.

Programs must also specify what products can be previously stored on pallets. For example, food and beverage processors should not accept pallets previously used to ship waste or chemicals, nor should they accept pallets that may be have been soiled with animal byproducts or waste.

Independent laboratory studies have demonstrated pathogens and other indicator organisms can be isolated by soaking pallets in sterile water or soaking wood shavings from those pallets in the same medium. The work has demonstrated that past uses of the pallets clearly relate to the micro flora recovered. For example, Salmonella were routinely isolated from pallets used for poultry. The same requirements you demand of shipping containers should apply to pallets: clean, no infestation, no off-odors and used for foods only.

There is a trend for processors to utilize both wooden and plastic pallets. The rule of thumb is that anything moving into the production area is moved on a plastic pallet. A plastic pallet can be cleaned and sanitized, and it eliminates the potential contamination from wood and metal (nails or staples) in a production area. In addition, some audit schemes will downgrade a facility for having wood in a processing area.

To be effective, a pallet management program must be fully documented and managed. Work instructions or procedures should clearly define who is responsible for what, and outline procedures and expectations. All workers involved with the program must be properly trained and documented. 

To test your program’s effectiveness, conduct and document a risk assessment. Look for small gaps that could create problems in the future.

Although pallets often don’t often get much respect, they have been implicated in infestations and cross-contamination with physical, chemical and biological hazards. Make sure that this simple yet essential tool does not pose a risk.

Did you enjoy this article? Click here to subscribe to Food Engineering Magazine.

Recent Articles by Richard Stier, Contributing Editor

You must login or register in order to post a comment.



Image Galleries

Food Engineering's Food Automation & Manufacturing Conference and Expo 2015

Images from Food Engineering's Food Automation & Manufacturing Conference and Expo in Clearwater Beach, Florida, April 12-15, 2015. The event brought food and beverage processors and suppliers together to gain valuable information on the latest trends and technologies in manufacturing, automation, sustainability and food safety.


Burns & McDonnell project manager RJ Hope and senior project engineer Justin Hamilton discuss the distinctions between Food Safety and Food Defense as well as the implications for food manufacturers of the Food Safety Modernization Act.
More Podcasts

Food Engineering

Food Engineering May 2015 Cover

2015 May

The May 2015 issue of Food Engineering explores effective tools for hitting manufacturing targets. Also, read how processors are looking for faster ways to detect harmful pathogens in food and beverages without sacrificing accuracy or reliability.

Table Of Contents Subscribe

Plant Facility/Site Issues

What issue about your current plant facility/site keeps you up the most at night?
View Results Poll Archive


Food Authentication Using Bioorganic Molecules

This text provides critical tools and data needed to augment routine food analysis and enhance food safety by aiding in the detection of counterfeit, and potentially deleterious, foods.

More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.


FE recent tweets

facebook_40.pngtwitter_40px.pngyoutube_40px.png linkedin_40px.pngGoogle +

Food Master

Food Engineering Food Master 2015Food Master 2015 is now available!

Where the buying process begins in the food and beverage manufacturing market. 

Visit to learn more.