Dry Processing

Feeders gently handle 2.5 million pounds of sunflower seeds a year

Giant Snacks of Wahpeton, ND prides itself in selecting superior hybrids from contract growers in North Dakota to produce the best sunflower seeds in the US for its customer base. From its original recipe of roasted and salted sunflower seeds, Giant Snacks has expanded the line to offer a variety of flavors including BBQ, dill pickle, salt and pepper, ranch and, since early 2009, spicy garlic.

fex0412dry1_inbody.jpg
Twin vibratory feeders from Gough Econ are part of an integrated packaging line to feed existing Gough Econ bucket elevators, which deliver sunflower seeds to weighers and packaging equipment. Source: Gough Econ.
 

Sunflower seeds are sold to consumers in packages ranging from 0.8 oz. to 14 oz. To process and package more than 2.5 million pounds of sunflower seeds each year, Giant Snacks operates two eight-hour shifts, five days a week.

“Quality assurance is important throughout the production process to make sure shells are not broken or dirty, are firm and do not have a limp texture. All packages are nitrogen flushed to assure shelf freshness,” says Al Engstrom, Giant Snacks plant manager.

Just as quality is important in selecting and packaging the seeds, totally automating its two integrated packaging lines was a priority for the processor to increase productivity.

To close the production loop, the processor added twin vibratory feeders from Gough Econ to feed product automatically into existing Gough Econ “S” Series Swinglink bucket elevators. The Swinglink system consists of 180 nine-in. wide polypropylene buckets impregnated with a glass fiber resin to prevent staining and enable ease of product flavor change. Engstrom says that automating the operation has helped considerably in meeting productivity and quality goals.

Super sacks containing roasted sunflower seeds are hung over the twin vibratory feeders. An opening on the bottom of the super sacks feeds the seed to the six-ft. long-by-one-ft. wide vibratory feeders that operate at a rate of 3,000 lbs./hour.

Four coil springs on the frame assembly of the feeders minimize vibration transfer and assure gentle handling of the material with minimum breakage as it travels to the bucket elevators. The buckets remain in a horizontal position throughout the circuit except at the discharge point to the form, fill and seal packaging equipment. Keeping the buckets in a horizontal position assures product integrity and keeps the buckets overlapped to prevent product spillage.

“This design ensures free falling of product from the buckets without product spillage,” says Engstrom. “The smooth bucket surface eliminates product trap areas and provides an excellent means of transfer into a single plane.

“The Gough Econ units are a major part of our automation process and have been operating flawlessly,” notes Engstrom.

He notes the feeders have added reliability and flexibility into the production line and assure gentle handling of the product. Plus, he says the feeders operate economically and efficiently using minimum power. Vibratory feeders or screens are typically used when applications are beyond the scope of an electromagnetic drive and in particular when units require lengths in excess of five feet and widths greater than 18 inches.

From the bucket elevators, product is pneumatically discharged over the end of each bucket into a hopper and gravity fed into Yamato Data Weight Sigma Plus series scales, part of the Hayssen/Sandiacre Ultima ST Panel View 600 Model 12-19 fill-and-seal machine. After sealing, the package runs through a case taper where bar codes are added along with the size, Julian date code, time packed and who packed it. v

For more information:

Andy Leitch, 704-399-4501, aleitch@goughecon.com



 

Did you enjoy this article? Click here to subscribe to Food Engineering Magazine.

Recent Articles by Wayne Labs, Senior Technical Editor

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

Food Engineering's Food Automation & Manufacturing Conference and Expo 2015

Images from Food Engineering's Food Automation & Manufacturing Conference and Expo in Clearwater Beach, Florida, April 12-15, 2015. The event brought food and beverage processors and suppliers together to gain valuable information on the latest trends and technologies in manufacturing, automation, sustainability and food safety.

Podcasts

Burns & McDonnell project manager RJ Hope and senior project engineer Justin Hamilton discuss the distinctions between Food Safety and Food Defense as well as the implications for food manufacturers of the Food Safety Modernization Act.
More Podcasts

Food Engineering

Food Engineering April 2015 Cover

2015 April

The April 2014 issue of Food Engineering features the Plant of the Year: Mars Chocolate. The first new Mars chocolate candy plant in North America in 35 years is not only LEED Gold certified, it’s highly automated as well.

Table Of Contents Subscribe

Plant Facility/Site Issues

What issue about your current plant facility/site keeps you up the most at night?
View Results Poll Archive

THE FOOD ENGINEERING STORE

Food-Authentication-Flyer-(.gif
Food Authentication Using Bioorganic Molecules

This text provides critical tools and data needed to augment routine food analysis and enhance food safety by aiding in the detection of counterfeit, and potentially deleterious, foods.

More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

STAY CONNECTED

FE recent tweets

facebook_40.pngtwitter_40px.pngyoutube_40px.png linkedin_40px.pngGoogle +

Food Master

Food Engineering Food Master 2015Food Master 2015 is now available!

Where the buying process begins in the food and beverage manufacturing market. 

Visit www.foodmaster.com to learn more.