Simplifying candy machine controls

Savage Bros candymachines
Simple or complex, Savage Brothers candy machines, with a common control architecture from Schneider Electric, are much easier to program and maintain. Delivery times have been shortened, and software updates can be done by email. Source: Schneider Electric.

Since 1855, Savage Brothers (Elk Grove Village, IL) has been building machines that melt and temper chocolate. Previously, designs used a programmable controller (PLC) and two temperature controllers, but the features were hard to use, and the PLC wasn’t easy to program or make changes. Since each candy processor required some degree of customization, the machine builder began looking for a simpler solution.

In 2009, Savage Brothers began examining how it could consolidate its machine platforms to enable simpler programming and have more diagnostic and performance capabilities. After meeting with Schneider Electric, the machine builder found that the Magelis XBT GC HMI controller would meet its needs. The device combines control capabilities with an easy-to-use HMI.

“We were able to replace two temperature controllers with the HMI/PLC combo unit, going from a huge control box to a smaller one,” says Paul Sulisz, Savage Brothers director of operations. “More importantly, our machines are semi-custom. We make them per end-user specifications. The XBT GC HMI controller gives our customers more of what they’re looking for because we’re able to make certain custom tweaks to the program much more efficiently.”

The HMI controller is part of Schneider’s MachineStruxture architecture, a comprehensive automation solution for industrial machines, based on flexible hardware platforms and SoMachine, a single modular, reusable software suite. The software helps OEMs design more energy-efficient and cost-effective machines that maximize performance using tested, validated and documented architectures and application function block libraries.

In 2010, after having success with its simple machines, Savage Brothers began converting its more complex machines to use the MachineStruxture platform. Since the higher-end machines require more controls and I/O, the machine builder uses the Modicon M238 PLC. Both the HMI controller and the PLC are programmed with SoMachine software.

“Everything that we learned about the XBT GC HMI controller we were able to transfer over to the M238 PLC. We didn’t have to learn new product,” says Sulisz. “We like that MachineStruxture gives us the flexibility to engineer both our simple and complex machines in one environment. We don’t have to go in and out of different software packages to program the various pieces of hardware.”

The machine builder finds service and maintenance easier with SoMachine. “If there’s a program change, we can email it out or put it on a memory stick and mail it to our customers,” adds Sulisz. “We don’t have to send out a service tech. Before, updates could take as long as a week, whereas now they’re on the fly.”

The new machine architecture lets Savage Brothers say “yes” to their customers’ requests for complex machines. “In the past, we would avoid a more complex machine because we didn’t have a cost-effective or efficient way to develop it,” says Sulisz. Functions can now be built into a machine in a few minutes rather than a few days. In the past, it could take as long as six months to build a single machine. Now this time is often cut down to a month, allowing the machine builder to increase its business by 20 percent.

Did you enjoy this article? Click here to subscribe to Food Engineering Magazine.

You must login or register in order to post a comment.



Image Galleries

Plant of the Year 2015

Mars Chocolate was chosen as Food Engineering’s 2015 Plant of the Year. The first new Mars candy plant in North America in 35 years is not only LEED Gold certified, it’s highly automated as well.


Burns & McDonnell project manager RJ Hope and senior project engineer Justin Hamilton discuss the distinctions between Food Safety and Food Defense as well as the implications for food manufacturers of the Food Safety Modernization Act.
More Podcasts

Food Engineering

Food Engineering April 2015 Cover

2015 April

The April 2014 issue of Food Engineering features the Plant of the Year: Mars Chocolate. The first new Mars chocolate candy plant in North America in 35 years is not only LEED Gold certified, it’s highly automated as well.

Table Of Contents Subscribe

Plant Facility/Site Issues

What issue about your current plant facility/site keeps you up the most at night?
View Results Poll Archive


Food Authentication Using Bioorganic Molecules

This text provides critical tools and data needed to augment routine food analysis and enhance food safety by aiding in the detection of counterfeit, and potentially deleterious, foods.

More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.


FE recent tweets

facebook_40.pngtwitter_40px.pngyoutube_40px.png linkedin_40px.pngGoogle +

Food Master

Food Engineering Food Master 2015Food Master 2015 is now available!

Where the buying process begins in the food and beverage manufacturing market. 

Visit to learn more.