Automation
TECH FLASH

Real-time moisture analysis key to fruit-gum candy production

May 25, 2012
/ Print / Reprints /
ShareMore
/ Text Size+

Process analytical technology (PAT), originally conceived by FDA for the pharma industry to achieve tighter and more predictable control of processes, can also work well for some food and beverage industry applications. Applied properly, PAT includes tools such as multivariate analysis, design of experiments, risk analysis, statistical process control (SPC) and other process control devices. All of these tools do not have to be employed in the same application. They are used according to the level of control needed. Using PAT is a good way to guarantee quality and minimize waste. PAT makes use of inline, online real-time sensors to pull continuous data from a process, e.g., temperature and moisture.

PAT moisture application
PMD300 sensor installation monitors moisture of molding starch. Source: Sartorius.

One process variable, or critical process parameter (CPP), that lends itself well to PAT techniques is the control of moisture—such as in drying milk or maintaining the critical moisture level to produce gelatin-based confectioneries (for example, fruit-gum candies). If certain ingredients are too moist, they can stick together, creating clumps and making storage and transport difficult. If they’re too dry, they can’t be mixed properly to be further processed by other equipment.

In a real-world process application depicted on the Sartorius website, PAT technology controls a gumdrop molding application. In the production of gelatin-based confectionery, which uses the “mogul technique” (molding of soft gummy candies—e.g., gumdrops—typically based on corn starch), the mogul starch must be sufficiently stable for the molding process. The required stability is achieved by carefully adjusting the moisture and temperature of the molding starch, depending on the type of final product. In addition to the moisture and temperature CPPs, the dwell time under defined storage has a critical impact on the product quality in the final step of the manufacturing process.

Corn starch is often used to make gelatin-based gum candies. To prevent waste, the left-over scraps from the molding process are reused in the next molding process. Before they can be reused, they go through a drying process. The drying process uses considerable energy, and the moisture level of the gelatin material has to be held to a consistent and precise level to maintain the correct surface texture of the gum.

Sartorius moisture analyzer
Sartorius PMD300 moisture sensor and controls.

To get the control needed, a European candy manufacturer chose to implement a PAT system based on the Sartorius Mechatronics Model PMD300 series online microwave resonance moisture analyzer, which monitors the starch drying process, ensuring the starch will be at the right moisture level for optimum molding. According to Dan Kopec, Sartorius process analytics manager, the monitoring system checks the product for moisture in real time, continuously transmitting the data to a high-level logic controller. The controller keeps the dryer at the right temperature to maintain the correct moisture level of the product as it passes through the dryer.

The controller can be configured to send alarm signals if the moisture range exceeds setpoint levels. The online moisture analyzer enables non-destructive measurement and provides measuring frequencies of less than a second apart. For recordkeeping, the manufacturer is able to monitor, log and optimize the entire process.

For more information, visit the Sartorius microsite, “PAT in the Food Industry,”  or contact Dan Kopec, 480-251-9049.

Did you enjoy this article? Click here to subscribe to Food Engineering Magazine.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

Plant of the Year 2014

Blue Diamond Growers was chosen as Food Engineering's 2014 Plant of the Year. The Sacramento-based company is the world’s largest producer of almonds and almond ingredients.

Podcasts

Burns & McDonnell project manager RJ Hope and senior project engineer Justin Hamilton discuss the distinctions between Food Safety and Food Defense as well as the implications for food manufacturers of the Food Safety Modernization Act.
More Podcasts

FSMA Audit

What is the is most important step you have taken to become ready for a FSMA audit?
View Results Poll Archive

Food Engineering

FE August 2014

2014 August

The August 2014 issue of Food Engineering explores how your operation could be doing more to create a culture of employee engagement. Also, read more on how your business and insurance partners must know the basics of your business and its nuances as well.

Table Of Contents Subscribe

THE FOOD ENGINEERING STORE

Food-Authentication-Flyer-(.gif
Food Authentication Using Bioorganic Molecules

This text provides critical tools and data needed to augment routine food analysis and enhance food safety by aiding in the detection of counterfeit, and potentially deleterious, foods.

More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

Food Master

Food Master Cover 2014Food Master 2014 is now available!

Where the buying process begins in the food and beverage manufacturing market. 

Visit www.foodmaster.com to learn more.

STAY CONNECTED

FE recent tweets

facebook_40.pngtwitter_40px.pngyoutube_40px.png linkedin_40px.pngGoogle +