Innovation / Case Studies & Field Reports

Ribbon blender improves consistency in foodservice products

June 8, 2012
/ Print / Reprints /
ShareMore
/ Text Size+
Trans

Heinz innovation team finds novel use for a familiar mixing technology.

Say “Heinz,” and everyone thinks of ketchup. After all, the company that began delivering Heinz Ketchup to local grocers with a horse-drawn wagon in 1876 is now the world’s foremost producer of ketchup. Each year, Heinz uses about 2.5 million tons of tomatoes to produce ketchup, pasta sauces, soups and other grocery staples. 

At the Heinz Innovation and Quality Center outside Pittsburgh, PA, the pilot plant that Rick Schnupp manages is dedicated to satisfying consumer desires. This is where Heinz recently retuned its ketchup recipe to cut down on sodium without sacrificing taste and microstability. It is also where the Heinz Dip and Squeeze Ketchup package used in foodservice came to life.

“Our job is to develop fresh ideas,” says Schnupp. “Besides our work with ketchup, we’re improving recipes, production and packaging for hundreds of other products. On any given day in our plant, you may see us working with dry and frozen soups, tartar sauce, sandwich sauce, mayonnaise, mustard, chili, barbeque sauce, macaroni and cheese dinners and frozen desserts. Each day, we face the same challenge: controlling all the variables while we race to hit our target flavor and nutritional profiles, optimize quality and consistency, and deliver on schedule.

“We often have to complete the development process and deliver product samples in days. That requires some serious technology and process control.”

The pilot plant is built for speed and tight control. High-tech manifolds in two “process zones” operate like giant switchboards—automatically metering products and routing them to process stations. Heating and cooling media are controlled precisely. Dozens of process variables are monitored during processing. QA testing confirms the results.

Recently, the development team ran into an unexpected challenge—and a surprising solution.

“Our QA testing revealed that we could improve product consistency with better agitation in the holding tank upstream from our packaging equipment. Despite the slow agitation already in the tank, we found that soup noodles and other garnishes, for example, were less than 100 percent homogeneous once the product was actually packaged. We needed a way to produce a truly even distribution—top to bottom and side to side—in the tank,” Schnupp says.

Conventional wisdom would suggest replacing the agitator in the tank, or perhaps adding more control over the speed and pitch of the agitator. But Schnupp’s team had another idea.

“In any plant these days, where you’re always driving to improve product quality and consistency, the answer is often a system that is highly customized, highly automated and expensive. But once in a while, the best answer turns out to be a novel application of the most familiar technology you can imagine.

“We’d had a 1-cu.-ft. ribbon blender in the plant for nearly 10 years, which was an extremely versatile mixer. That’s why they’re so common in the industry. This experience gave us the idea of replacing the tank altogether with a continuous blender that could adapt to a wide variety of products, provide either gentle or aggressive agitation and hold ingredients in near-perfect suspension before pumping to the packaging equipment,” Schnupp states.

The team contacted the original blender manufacturer, Charles Ross & Son Company.  After consulting with Ross engineers, they ordered a 5-cu.-ft. sanitary ribbon blender for the line.

A sanitary ribbon blender is a horizontal mixer with agitation provided by inner and outer helical ribbons turning in a U-shaped trough. The ribbons are pitched to move material axially and radially. With close tolerances in the trough and design additions such as flush discharge valves and Teflon scrapers, dead zones are eliminated, and thorough cleaning during changeover is simple and quick.

The modern ribbon blender is driven by a gearmotor and equipped with a control system that provides variable speed, overload protection and adjustable starting torques to accommodate a wide variety of products and batch sizes.

“Ribbon blenders are generally used for fairly simple solid-solid blending,” says Schnupp, “like blending spices and snacks. Our application is different because we’re blending everything from dry soup mixes to sauces, salad dressings and seafood dinners in a highly controlled environment.

“We collaborated with Ross engineers to customize the blender to fit our process environment. Because this is a continuous line, we needed low-/high-level sensors to properly control the hot and cold liquid and particulate feeds. We also needed jacketing to control the mix temperature and guarantee microstability,” he states.

“Finally, we needed variable speed control. Thin broth soups require vigorous agitation, for example, while our cream of broccoli and mushroom soup requires gentle agitation to avoid damaging delicate ingredients.”

The sanitary blender is now hard piped and integrated with the other equipment and process controls in the plant. With continuous blending, the process line delivers 100 percent homogeneous product to filling equipment—ensuring a more consistent customer experience for Heinz foodservice clients.

 

For more information:

Bill Alhofen; 800-243-ROSS; balhofen@mixers.com

Did you enjoy this article? Click here to subscribe to Food Engineering Magazine.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

Plant of the Year 2014

Blue Diamond Growers was chosen as Food Engineering's 2014 Plant of the Year. The Sacramento-based company is the world’s largest producer of almonds and almond ingredients.

Podcasts

Burns & McDonnell project manager RJ Hope and senior project engineer Justin Hamilton discuss the distinctions between Food Safety and Food Defense as well as the implications for food manufacturers of the Food Safety Modernization Act.
More Podcasts

Food Engineering

FE October 2014 Cover

2014 October

The October 2014 issue of Food Engineering explores companies that have successfully grappled with "the new business reality" and are coming to terms with it being here to stay. Also, read about the work going on behind the scenes to keep FSMA on track.

Table Of Contents Subscribe

FSMA Audit

What is the is most important step you have taken to become ready for a FSMA audit?
View Results Poll Archive

THE FOOD ENGINEERING STORE

Food-Authentication-Flyer-(.gif
Food Authentication Using Bioorganic Molecules

This text provides critical tools and data needed to augment routine food analysis and enhance food safety by aiding in the detection of counterfeit, and potentially deleterious, foods.

More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

STAY CONNECTED

FE recent tweets

facebook_40.pngtwitter_40px.pngyoutube_40px.png linkedin_40px.pngGoogle +

Food Master

Food Master Cover 2014Food Master 2014 is now available!

Where the buying process begins in the food and beverage manufacturing market. 

Visit www.foodmaster.com to learn more.