Packaging
Packaging

Recession? What recession?

At November’s PACK EXPO trade show, food and beverage equipment buyers came, they saw, they purchased.

February 6, 2013
Trans

 

If market share numbers are indicative of trade show attendance, 27,000 packaging machinery buyers from food and beverage companies prowled the aisles at the 2012 PACK EXPO event, and they had the kind of checkbook balances that make equipment fabricators’ eyes water.

“US purchasers of equipment seem to be sitting on a lot of money,” noted Tom Egan, vice president-industry services, Packaging Machinery Manufacturers Institute (PMMI), on PACK EXPO’s opening day. Egan’s optimism was based on PMMI’s 2012 Shipments & Outlook Study, an annual survey of equipment machinery sales. The study describes a supplier segment fueled by double-digit growth in customer orders that obliterates the declines in 2008 and 2009.

While the economic recession began in 2007, the effects weren’t felt until late 2008, when a 0.4% decline in machinery shipments occurred. The following year  saw a 16.3% drop in orders, but the segment roared back in 2010, with a 31% sales gain  followed by 19.3% in 2011. According to Egan, machine purchases remained strong through 2012’s first three quarters, with continued strength projected through 2013.

Food and beverage manufacturers account for three-fifths of the market, dwarfing all other segments (pharmaceutical packagers are the next largest segment, at 8 percent). Machinery purchases by food and beverage firms increased 17 percent in 2011 to $5.3 billion. However, production growth of 2.2 percent in prepared foods and 3.9 percent in beverages, including coffee and tea, will slow in 2013 before declines of 5.1 percent in beverages and 0.2 percent in food in 2014, according to PMMI’s forecast.

Still, implementation of the Food Safety Modernization Act (FSMA) will force food and beverage manufacturers to buy new packaging equipment, Egan predicts. “Companies are beginning to game plan for FSMA, particularly in baking and snack, where they are moving from visually clean to microbiologically clean requirements,” he says. “There’s no provision in FSMA for a grandfather exemption. All areas, including packaging, will have to be brought into compliance.”

The trade deficit in packaging machinery grew to $1.1 billion in 2011, with foreign firms selling $1.8 billion worth of equipment to US manufacturers compared to $686 million in overseas shipments by US firms. Part of the deficit reflects the growing use of pouches and other flexible packages. European equipment companies have catered to flexible applications for decades. Consequently, there “is a perception” their machinery is superior, Egan concedes. However, any advantages have been erased by American ingenuity, he adds, and domestic machine builders will benefit from the growing demand for pouch packages, particularly for food, where half of surveyed companies say they will increase their use of flexible packages. 

Did you enjoy this article? Click here to subscribe to Food Engineering Magazine.

Recent Articles by Kevin Higgins, Senior Editor

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

IPPE 2015

The 2015 International Production and Processing Expo (IPPE) was held in Atlanta at the Georgia World Congress Center, Jan. 27-29. More than 30,000 poultry, meat and feed industry representatives attended the event to interact with the 1,288 exhibitors on the show floor that covered more than 490,000 net square feet. At the show exhibitors demonstrated innovations in equipment, supplies and services utilized by firm in the production and processing of meat, poultry, eggs and feed products.

Podcasts

Burns & McDonnell project manager RJ Hope and senior project engineer Justin Hamilton discuss the distinctions between Food Safety and Food Defense as well as the implications for food manufacturers of the Food Safety Modernization Act.
More Podcasts

Food Engineering

Food Engineering March 2015 cover

2015 March

In this March 2015 issue of Food Engineering, we explore how a surprise FDA audit could be serious if you're not recording key data.

Table Of Contents Subscribe

Plant Facility/Site Issues

What issue about your current plant facility/site keeps you up the most at night?
View Results Poll Archive

THE FOOD ENGINEERING STORE

Food-Authentication-Flyer-(.gif
Food Authentication Using Bioorganic Molecules

This text provides critical tools and data needed to augment routine food analysis and enhance food safety by aiding in the detection of counterfeit, and potentially deleterious, foods.

More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

STAY CONNECTED

FE recent tweets

facebook_40.pngtwitter_40px.pngyoutube_40px.png linkedin_40px.pngGoogle +

Food Master

Food Engineering Food Master 2015Food Master 2015 is now available!

Where the buying process begins in the food and beverage manufacturing market. 

Visit www.foodmaster.com to learn more.