Columns

It's in the can

September 29, 2005
/ Print / Reprints /
ShareMore
/ Text Size+

Soup maker installs 12 cooker-coolers on a new canning line.



Morgan Foods installed 12 new Chester-Jensen cooker-coolers to accommodate a new line that produces 1,200 cans of soup per minute. Source: Chester-Jensen.

For four generations, Morgan Foods has been canning soups, beef products and sauces in its Austin, IN, manufacturing facility. And, over the past 15 years, the company has been successfully doing it via 12 Chester-Jensen kettles and tanks. Based on the reliability of the equipment, the company turned to Chester-Jensen once again when it wanted to add a new canning line in the spring of 2004.



"We were expanding and needed to add a new high-speed filling line that would accommodate 1,200 cans per minute," says Cory Lytle, project engineering manager with Morgan Foods. "This wasn't going to be a typical new filling line that required just a few kettles here and there. We needed kettles, holding tanks, a massive mixing station and a few other pieces of equipment on the line. We explained the product we would be producing on the new line, the different locations where product would be running and the tanks that would be required.

"After our discussion, Chester-Jensen determined that it would be able to provide all the equipment we needed for the new line, and we saw this as a huge benefit," continues Lytle. "We would be able to get all our equipment from a single company, which would allow us to keep like items on the shelf to speed up maintenance and reduce downtime. If we needed spare parts or if anything went wrong on the line, we would have a single-source provider to help us out."

Ultimately, Morgan Foods decided to install 12 additional Chester-Jensen cooker-coolers, three of which are holding tanks and nine that are cooker-coolers, on the new line. Included in the project were several tanks, ranging in size from 50 to 500 gallons, which are used to heat and melt frozen blocks of product to prepare for production, as well as four 1,000-gallon kettles where the company makes and heats the final batches of broths, condensed soups and other products. From there, the product is pumped into a newly installed Chester-Jensen 1,500-gallon holding tank where the product is kept warm before going to the filling line.

Chester-Jensen's cooker-coolers are steam jacketed, cone-bottom cooking and cooling vessels for processing pumpable food products. The circulating jacket is 14-gauge, type 304 stainless steel, dimpled and spot welded to the cone bottom and, using spiral heat exchange media design, ASME coded for 100 psig at 340

 

Contact: Bob Skoog

Chester-Jensen Co., Inc.

(610) 876 6276

www.Chester-Jensen.com

Did you enjoy this article? Click here to subscribe to Food Engineering Magazine.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

Plant of the Year 2014

Blue Diamond Growers was chosen as Food Engineering's 2014 Plant of the Year. The Sacramento-based company is the world’s largest producer of almonds and almond ingredients.

Podcasts

Burns & McDonnell project manager RJ Hope and senior project engineer Justin Hamilton discuss the distinctions between Food Safety and Food Defense as well as the implications for food manufacturers of the Food Safety Modernization Act.
More Podcasts

FSMA Audit

What is the is most important step you have taken to become ready for a FSMA audit?
View Results Poll Archive

Food Engineering

FE September 2014

2014 September

The September 2014 issue of Food Engineering explores how lean manufacturing, quality improvements and increased automation helps processors meet rapidly changing demands. Also, read how robotics, advanced machine controls, software and OEE are just a few of the tools that can boost productivity on packaging lines.

Table Of Contents Subscribe

THE FOOD ENGINEERING STORE

Food-Authentication-Flyer-(.gif
Food Authentication Using Bioorganic Molecules

This text provides critical tools and data needed to augment routine food analysis and enhance food safety by aiding in the detection of counterfeit, and potentially deleterious, foods.

More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

Food Master

Food Master Cover 2014Food Master 2014 is now available!

Where the buying process begins in the food and beverage manufacturing market. 

Visit www.foodmaster.com to learn more.

STAY CONNECTED

FE recent tweets

facebook_40.pngtwitter_40px.pngyoutube_40px.png linkedin_40px.pngGoogle +