Sanitary drum unloading systems can be lifesavers
Drum unloaders provide a safer way of emptying the drum’s contents, says Kellie Momchilovich, Graco Sanitary Equipment product manager. Drum unloaders are best suited for unloading highly viscous materials, and can also transfer tomato pastes and peanut butters, oils and syrups.
The typical evacuation time for a drum unloader is about five minutes vs. comparable manual processes that can take 30 minutes or more. Also, with manual processes, when water is introduced to the material, it typically needs to be removed at a later part in the process, which takes more time and can introduce contaminants into the product.
The drum unloader reduces residual product left in the bottom and sides of the drum, says Momchilovich. A high-performance drum unloader with an inflatable wiper seal will leave less than 1 percent residual product remaining in the bottom of the drum.
Pumps are a key part of the unloading system. “One of the most common pumps on a drum unloader is a sanitary, air-operated double-diaphragm pump,” says Momchilovich. A diaphragm pump unloading system can move materials with viscosities up to 100,000 cps. Typical materials a diaphragm pump unloader can handle are fruit juice concentrates, salad dressings, condiments and sauces.
For unloading materials with viscosities greater than 100,000 cps, one method is to use a sanitary piston pump on a drum unloader. Piston pumps are capable of higher pressures to move high-viscosity materials longer distances. Piston pumps come in ratios. For example, a 12:1 piston pump provides an outlet fluid pressure 12 times the pressure of the inlet air, up to 1,200 psi, says Momchilovich. This outlet fluid pressure coupled with the down pressure of the drum unloader’s ram plate allows the processor to unload highly viscous materials like peanut butter and caramel, applications that would be very difficult with a double-diaphragm pump.
There have been advancements in drum unloader technology, says Momchilovich. The first is the creation of the inflatable wiper seal technology on the ram plate. After the ram plate and seal enter the drum, the user flips a switch, which inflates the seal to the appropriate pressure. The seal holds this pressure and gently scrapes the side of the drum as the ram plate moves from top to bottom. This architecture can achieve greater than 99 percent evacuation rates.
Strides have also been made in improving “cleanability” of the drum unloader, says Momchilovich. Processors need equipment that is easy to take apart, clean and put back together. Quick-disconnect clamps are replacing bolted designs. Easy-to-repair air valves are replacing air valves with 30 or more parts, and PTFE over-molded diaphragms are replacing diaphragms with an exposed fluid-side diaphragm plate. PTFE diaphragms eliminate the potential for bacteria to harbor between the fluid-side diaphragm plate and the diaphragm.
Often, drums are different sizes and shapes. Ingredient suppliers are constantly changing the size and shape of their drums, from conical to straight-sided. Momchilovich advises processors to be sure the unloaders they purchase are future proof and can adapt to various sizes and shapes, especially if a drum resembles more of a cone than a cylinder. Finally, a drum unloader can be a big investment, but it can pay off in less than a year through labor savings, employee safety and food safety.For more information, contact Kellie Momchilovich.