- THE MAGAZINE
- FOOD MASTER
• A Somerset, UK man was preparing a baby leaf and rocket (arugula) salad when he found the carcass of a small, dead bird among the salad materials. (BBC News, November 15, 2011).
• Kraft Foods Global, Inc. voluntarily recalled three varieties of Velveeta Shells & Cheese Single Serve Microwaveable Cups due to the possible presence of small, thin wire bristles (Kraft, September 30, 2011; FDA, October 3, 2011).
• A UK food production company was fined nearly £17,000 when a man found a dead mouse in the loaf of bread he was using to prepare sandwiches for his children (BBC News, September 27, 2010).
While the second incident above is an extremely difficult detection challenge, additional technology can solve the problem, and that may be how Kraft found the wire fragment and was able to alert the supply chain, keeping affected product to a relatively small number of UPCs (five) and 137,000 cases.
Metal detectors with improved sensitivity can help spot hard-to-find targets, but a single unit may not be enough. “When talking about wire contamination, it is important to understand ‘orientation effect,’” says Robert Rogers, Mettler-Toledo senior advisor for food safety and regulations. “A wire traveling through the detector in one orientation is easy to detect, yet in the opposite orientation it is difficult to detect. To improve the chance of detecting the material, one could place multiple detectors at different angles on a single production line. However this does not eliminate the need for a robust foreign body prevention program.”
One way to improve metal detector sensitivity with applications like sliced cheese, warm bread or filled bottles is to use multiple coil receivers, says Bob Ries, Thermo-Fisher lead product manager, metal detection and X-ray/product inspection business unit. “In the case of metal strands or wires, the only solution known today is to use two metal detectors adjacent to each other at 45° angles. This, in effect, covers all the possibilities [or orientation].”
X-ray systems are becoming sensitive enough to detect wires down to 0.3mm in diameter if they are long enough to create a visible, linear contaminant image the system can analyze and detect, says Ries.
However, X-ray systems are challenged by cases 1 and 3 above. Since X-ray detection is density based, objects like animal carcasses/bones—because they have little density—are difficult for X-ray systems to find. “Only the most dense bones and plastics are currently detectable,” adds Ries.
Retailers drive inspection
While government agencies may not be able to mandate the use of metal detection or X-ray systems, retailers have taken the lead in mandating this equipment because they know how important safe food is to their customers. Craig Wilson, Costco assistant vice president, food safety and quality assurance, circulated a letter more than six years ago to producers asking them to “raise the bar in the area of product inspection.” The letter states: “Our audit companies have been instructed to inform our vendors that dated metal detection devices should be replaced with X-ray units in all food processing facilities where applicable.”
“For customers like Costco, Sysco, airline companies and others, maintaining the highest product quality and food safety is critical,” says Adalberto Salce, plant engineer at Orval Kent’s Linares, Mexico facility. A large producer of prepared salads for foodservice customers in North America, Orval Kent installed a Mettler-Toledo Safeline X-ray system 18 months ago to monitor product quality.
Orval Kent produces more than 80 different types of fruit salads, which are packaged into 4- and 8-lb. PET jars and 1-, 3- and 5-lb. flexible pouches on five filling lines. “The Safeline X-ray system helps us achieve the highest product quality. It detects metal, glass, plastic and other types of foreign material and removes contaminated product from the production line,” adds Salce.
“We considered metal detectors, but the X-ray system was the better choice for us for several reasons,” explains Salce. “The X-ray system enables us to inspect for non-metal contaminants such as glass, which allows us to achieve the highest specifications. It offers consistent inspection even with the natural variations in the conductivity of our products. Since the X-ray system can be used after we’ve sealed the PET jars with foil, we can inspect at the end of the line where there is no risk of subsequent contamination.”
Compared to the old X-ray system, the Safeline PowerChek is more sensitive and reliable, says Salce. He tests it at the beginning of every production day and after every changeover, which is typically four or five times a day. “In the 18 months that we’ve had it, it’s never failed a test, and we’ve had no unplanned downtime. This system helps us guarantee our customers receive the highest product quality and food safety.”
Planning and using metal detection systems
Preventing metal-contaminated product from reaching the consumer should be a systematic approach instead of just installing a piece of equipment into the production line, suggests Rogers. Proper installation and system design are critical, as outside influences within the production environment could cause issues. The goal is to have a system capable of running at maximum sensitivity, absent of product, with no false reject activity. Thus, if any product is rejected, it should be further tested to determine the source of the contamination. Then corrective action can be taken to prevent further occurrences of contamination.
If a high level of false reject activity occurs, it must be addressed since it is an indication the program may be faulty and not necessarily the equipment, offers Rogers. Metal detectors may be reaching a plateau in terms of sensitivity or the ability to find smaller targets, but other improvements are extending the usefulness of these detection systems. “Detectors offer significantly higher performance today than even two years ago,” says Steve Gidman, Fortress Technology president. “Detection levels in the 0.5 to 0.8mm range are easily achievable with modern metal detectors.” And modern metal detectors are much better at living with real-world interference sources. “Proper shielding and signal processing techniques allow excellent performance in electrically active [noisy] environments,” he adds.
Last year, Lock Inspection introduced its Insight metal detector, which according to Lock President Mark D’Onofrio, uses advanced digital signal processing (DSP) to reduce unwanted product and environmental signals. This allows for more precise product setups and better overall performance. “The trick with metal detection is to run the electromagnetic field at super-high frequencies, but also effectively manage product signal and outside interference,” says D’Onofrio. Advancements in technology have contributed to improved detection for most metals.
In the recent past, several metal detectors used a couple of frequencies—usually one at a time—to obtain a signal from a target that was greater than the noise produced from the “product effect.” An example of product effect could be a moist bakery or salty product. A benefit of using two frequencies simultaneously is that one can be used to detect ferrous metals and the other, stainless steel (SS), according to Christopher Young, Anritsu product manager. While certain SS alloys can be a challenge for metal detectors, aluminum, which is not “seen” by X-ray systems, can be detected by a metal detector.
Another approach to effective design is to pick a single frequency from a range of frequencies (e.g., 31-800 kHz) that’s right for each product, says Steven Bunnell, Loma Systems sales and marketing manager. In Loma’s IQ3+ system, users can select a different frequency for a given product, or they can let the metal detector pick the best frequency for each product during the product “learn” or calibration step, which reduces the possibility of operator error.
A metal detection system that simultaneously uses multiple inspection frequencies can improve detection sensitivity and make it easier to reduce strong product effects such as salinity and water concentration, according to Todd Grube, Heat and Control manager of inspection systems. “With single and three-frequency metal detectors, processors typically reduce sensitivity to achieve a compromise between safety and excessive false positives.” Multi-spectrum technology (multiple frequencies), according to Grube, significantly reduces product effect and tracks it during production, automatically adjusting for changes in the product and inspection environment.
Five Star Gourmet Foods (Ontario, CA), a provider of high-quality frozen products including entrées, custom sauces and marinades, snacks and sandwiches, decided to try the multiple frequency technology as implemented by Heat and Control’s CEIA THS121 detector. “Our line operators decided to give it the torture test,” says QA Manager Marissa Myat. “We mixed different types of fresh and frozen product in the same run to expose any shortcomings. To our surprise, the CEIA detector passed every test. Its performance really exceeded our expectations.” Five Star runs from 150 to 450 items per minute per production line, and each detector runs a minimum of 14 hours per day, five days a week.
Little improvements in metal detectors can mean a lot. With the pressure that processors have been feeling to include both metal and X-ray systems in HACCP plans, suppliers are listening. “To that end, what was a detection level just five years ago is no longer accepted, and if the detection level can be improved by just 0.1mm, most food processors will force metal detector manufacturers toward that mark,” says Wayne Eide, Advanced Detection Systems marketing manager.
With incremental improvements in head construction symmetry, product screening and software, an improvement in target size, for example, from 2.0mm to 1.5mm is about 40 percent, according to Doug Pedersen, S+S Inspection Systems sales manager. “Some companies will change out a metal detector for this level of improvement, and look at it as only 0.5mm, which is small. But let me ask this question: Would you change any other piece of production equipment for a 40 percent improvement in performance? Very likely.”
Extending metal detectors’ performance
While some would say that the basic physics of the metal detector is mature and as good as it gets, the emphasis, therefore, has been on improving the peripherals of metal detection systems. “Enhancements in metal detector software and coil configurations have resulted in modest improvements in sensitivities, and the best sensitivities are realized in the pharmaceutical industry as very small apertures are used to scan tablets,” says Ray Spurgeon Jr., Eriez X-ray Inspection Division product manager. “Typically, sensitivities in this industry range from 0.3 to 0.5mm diameter. In my opinion, metal detection technology is mature and will offer little or no future improvement to sensitivity.”
“There is always a point that the physics of the metal detector has reached its limits, and that is why you see the improvements in compensating for external factors such as vibration and product-effect variability,” counters Eide. “For example, our Acculearn technology is so smart that the product learn cycle that once took many passes is now completed in just two passes.” Older metal detectors took many passes, and some never learned the product as well as the machines today, claims Eide.
With the auto-learning capabilities of metal detectors, the ease of use is improving to a level where operators can easily set up a new product run without making mistakes in configuration, according to Young. A bigger issue, says Young, is the product itself changing in consistency. For example, a fresh-baked loaf of bread might be “learned” at one temperature, but over time, the product temperature or moisture content changes, potentially affecting the performance of a metal detector.
Most metal detection systems (and X-ray as well) are also network friendly and provide useful tools to track inspection results. For example, Lock’s Insight series delivers the streamlining of data management reports and product profiles through its Optix software and offers wireless Ethernet and SCADA packages as well, according to D’Onofrio.
State-of-the-art X-ray system
Ries, who is responsible for both metal detection and X-ray systems, sees X-ray as a step beyond metal detection, but not a panacea for all inspection applications. “X-ray systems can typically find 10-30 percent smaller metal contaminants and many non-metal contaminants. The price is higher, usually two to three times, and system lifetime is shorter (five to seven years vs. 10 to 15 years for metal detectors).” Current state-of-the-art with X-ray is 0.5 to 0.7mm detection of metal or thin products. Because X-ray detection is density based, many other contaminants more dense than water can also be found. Glass detection is usually in the 1.5 to 3mm range, and stones with density similar to that of glass have comparable results under X-rays. However, only the most dense bones and plastics are currently detectable, as stated above.