Columns

Keeping an eye on the wafer

Inspection system reduces rejects, increases productivity by 5%.

The simple installation of the Cognex In-Sight 5400 vision sensor at Mannerschnitt allows the checking station to be kept compact. Fisheye view from directly overhead shows the vision sensor (center) taking a picture of a package in transit. Source: Cognex.

With an annual capacity of 8,800 tons of flat wafers and biscuits, the world’s largest wafer oven is located at Mannerschnitt’s plant in Perg, near Linz, Germany. The plant has been producing chocolate wafer treats known as Mannerschnitte or Neapolitaner for 100 years. Enormous quantities of product are processed by 100 employees, who ensure the portions are packaged correctly and kept airtight.

Mannerschnitt decided a vision system-based checking station could help with packaging quality. Besides being easy to operate and program, the vision system would have to perform reliable inspection of up to 400 packages per minute, check many product variants and make the production process smoother. In addition, the vision system would have to cope with 25 packaging color variants, handle 100 texts in different languages printed on the packaging, inspect label positioning, prevent dents and defects in the packaging and verify the presence of picture and text.

Schmachtl Gmbh from Linz, a Cognex partner system integrator, impressed Mannerschnitt with the results of a feasibility study done for the Perg plant. The solution employed Cognex’s In-Sight 5400 vision sensor to keep the design of the inspection station simple, allowing the mechanical set-up and installation to be done internally by Mannerschnitt’s own engineering/maintenance team. The inspection station checks whether the label is equally positioned from the left and right edges of the packaging, whether there are dents or defects in the packaging, which picture and text are on the packaging and much more.

To ensure operator and production efficiency, Schmachtl programmed customer-specific vision tasks for a wide range of packaging variants. It was important for operators to be able to easily manipulate the inspection station. The high-performance vision sensor combined with the capabilities of PatMax vision software allows many characteristics to be checked simultaneously and quickly. Individual packages flow through the inspection station on the conveyor without needing to be in a particular position. The vision system also detects any faults in the packaging supplied by external vendors.

Mannerschnitt employees are able to easily train various characteristics on the vision system for the entire range of packaging. This enables the staff to react quickly to various types of faults. For example, if a package is dented, it may become jammed further down the line, resulting in additional unnecessary product rejects. Now these incidents are at a minimum, and the processor is able to guarantee the packaging is airtight and flawless in appearance. By keeping interruptions in the production flow to a minimum, productivity has increased by around 5%.

“If the conveyor belt is operating at a speed of, for example, 270 packages per minute, then just a few seconds of defective production means several dozen rejected packages,” says Reinhard Gassner, Perg plant manager. “This is not just a question of cost; it also has a negative effect on the production flow. Problems like this are now in the past.”

For more information:

John Lewis, 508-650-3140, john.lewis@cognex.com.

Did you enjoy this article? Click here to subscribe to Food Engineering Magazine.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

IPPE 2015

The 2015 International Production and Processing Expo (IPPE) was held in Atlanta at the Georgia World Congress Center, Jan. 27-29. More than 30,000 poultry, meat and feed industry representatives attended the event to interact with the 1,288 exhibitors on the show floor that covered more than 490,000 net square feet. At the show exhibitors demonstrated innovations in equipment, supplies and services utilized by firm in the production and processing of meat, poultry, eggs and feed products.

Podcasts

Burns & McDonnell project manager RJ Hope and senior project engineer Justin Hamilton discuss the distinctions between Food Safety and Food Defense as well as the implications for food manufacturers of the Food Safety Modernization Act.
More Podcasts

Food Engineering

Food Engineering March 2015 cover

2015 March

In this March 2015 issue of Food Engineering, we explore how a surprise FDA audit could be serious if you're not recording key data.

Table Of Contents Subscribe

Plant Facility/Site Issues

What issue about your current plant facility/site keeps you up the most at night?
View Results Poll Archive

THE FOOD ENGINEERING STORE

Food-Authentication-Flyer-(.gif
Food Authentication Using Bioorganic Molecules

This text provides critical tools and data needed to augment routine food analysis and enhance food safety by aiding in the detection of counterfeit, and potentially deleterious, foods.

More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

STAY CONNECTED

FE recent tweets

facebook_40.pngtwitter_40px.pngyoutube_40px.png linkedin_40px.pngGoogle +

Food Master

Food Engineering Food Master 2015Food Master 2015 is now available!

Where the buying process begins in the food and beverage manufacturing market. 

Visit www.foodmaster.com to learn more.