Columns

Field Reports: Flour mill sees the light

August 12, 2003
/ Print / Reprints /
ShareMore
/ Text Size+
Enclosed luminaires with curved surfaces stop flour from adhering, shed more light on inspection process.

Vantage food grade luminaires light the packaging area at General Mills’ Kansas City mill. The units have no nooks, crannies, ledges, latches or fins that attract flour. Source: Holophane.


SANITATION IS A PRIMARY CONCERN AT ALL General Mills processing facilities. In its 80-year-old flour milling plant in Kansas City, adequate lighting had become an issue in keeping up with the company’s high sanitation standards. General Mills signature products such as Gold Medal flour and Bisquick baking mix are made in the Missouri plant.

When the re-enforced concrete facility was constructed, it was illuminated with an incandescent lighting system with glass globes. These fixtures were removed for sanitary reasons and replaced with luminaires with plastic reflectors. Over the years, the plant experienced problems with the plastic melting, which led to retrofitting the units with Bantam 2000® luminaires from Holophane.

“We considered a number of lighting systems from other manufacturers and decided against them because many were constructed with flat surfaces and nooks and crannies where the flour could potentially accumulate,” said Robert McClellan, electrical team leader for the General Mills plant. “The Bantam luminaires are enclosed and have curving surfaces that prevent the flour from adhering to them.”

Bantam luminaires with an Enduralume® acrylic lens and 175-watt metal halide lamps were installed in the processing areas on all eight floors within the plant and in the stairwells. The fixtures were mounted on hooks installed from 10 to 15 feet above the concrete floor—depending upon the ceiling height—and spaced 15 feet on center.

“At the start of this project, our goal was to double the light levels,” said McClellan. “By installing the Bantam luminaires, we gained significantly higher footcandle levels using less than half the number of fixtures we had originally planned to install. Employees love the new lighting system because they can see so much better to do their jobs.”

McClellan said that the metal halide lamps were specified because of the illumination they provide and their color rendering capabilities. Employees inspect the milled product to assure that it is white. Any tinge to the light—such as the yellowish color provided by high-pressure sodium lamps—could detract from their ability to determine the flour’s color.

Vantage® Food Grade Luminaires from Holophane were installed above the packaging operations, which are located on raised platforms. Ductwork and piping crisscross the ceiling in these areas and are used to transport product. Flour tends to collect on the outside of the piping and must be removed by maintenance personnel who inspect the lines.

The Vantage luminaires supply 15 percent uplight, which not only illuminates the ductwork and piping for cleaning and inspection, but promotes visibility throughout the area. Like the Bantam 2000 units, the Vantage units have no nooks, crannies, ledges, latches or fins that attract the flour.

“The Holophane luminaires have provided us with high levels of visibility and the flexibility we needed throughout the plant,” said McClellan. “Even though the fixtures have been installed for a short period of time, we expect them to require very little maintenance.” u

For more information:

Jim Pacocha, 740-345-9631, jpacocha@holophane.com; www.holophane.com

Did you enjoy this article? Click here to subscribe to Food Engineering Magazine.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

Plant of the Year 2014

Blue Diamond Growers was chosen as Food Engineering's 2014 Plant of the Year. The Sacramento-based company is the world’s largest producer of almonds and almond ingredients.

Podcasts

Burns & McDonnell project manager RJ Hope and senior project engineer Justin Hamilton discuss the distinctions between Food Safety and Food Defense as well as the implications for food manufacturers of the Food Safety Modernization Act.
More Podcasts

FSMA Audit

What is the is most important step you have taken to become ready for a FSMA audit?
View Results Poll Archive

Food Engineering

FE September 2014

2014 September

The September 2014 issue of Food Engineering explores how lean manufacturing, quality improvements and increased automation helps processors meet rapidly changing demands. Also, read how robotics, advanced machine controls, software and OEE are just a few of the tools that can boost productivity on packaging lines.

Table Of Contents Subscribe

THE FOOD ENGINEERING STORE

Food-Authentication-Flyer-(.gif
Food Authentication Using Bioorganic Molecules

This text provides critical tools and data needed to augment routine food analysis and enhance food safety by aiding in the detection of counterfeit, and potentially deleterious, foods.

More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

Food Master

Food Master Cover 2014Food Master 2014 is now available!

Where the buying process begins in the food and beverage manufacturing market. 

Visit www.foodmaster.com to learn more.

STAY CONNECTED

FE recent tweets

facebook_40.pngtwitter_40px.pngyoutube_40px.png linkedin_40px.pngGoogle +