Manufacturing News
TECH FLASH

Food producer uses pneumatic conveying system to handle 20 tons of baker’s-like flour

New system increases safety, efficiency and energy savings with new pneumatic conveying system.

April 28, 2013
/ Print / Reprints /
ShareMore
/ Text Size+

When Brian Miller, plant engineer for Mrs. Miller’s Homemade Noodles Ltd., which produces 40,000 pounds of noodles per week, switched from handling 50-pound bags of flour to handling 2,000-pound bulk bags, he knew he would need to integrate a new conveying system into his process. The former conveyor—an older, pressure-based system that transported the flour from a hopper through a volumetric feeder and finally to a mixer—would no longer satisfy the company’s needs.

Mrs. Miller’s Homemade Noodles Ltd., located in the middle of an Amish community in Fredericksburg, OH, is a family-owned and operated business that has produced preservative-free, homemade-quality products for over 30 years.

Miller’s goal was to implement a system that would efficiently convey 20 tons of very fine flour per week, and eliminate the need for manual filling. After some research, Miller found he could achieve this goal with a pneumatic conveying system from Vac-U-Max.

The Vac-U-Max system handles problems with fine powders by applying a high polish finish to the systems' interior and exterior, reducing the amount of powder that sticks to the system.

Since the inherent nature of the pneumatic system prevents loose powder from becoming airborne, it makes for a cleaner and safer environment all around. According to Miller, the system is completely enclosed and there is no mess.

Although the system has reduced some housekeeping time, Miller says the bulk of the gain is safety and efficiency.

“The new system is safer because it accommodates the super sacks better and feeds the product directly from bags without manual labor,” he explains. “Before, our guys were climbing up to a big hopper and would fill it by hand sometimes.”

In addition to increasing safety and efficiency in the plant, the new system is more compact, saves energy and reduces noise in the plant. “Space is always at a premium at any plant facility,” says Miller. “The Vac-U-Max is more compact and allowed us to eliminate that big hopper.” Miller states.

In addition to a smaller footprint, the system has fewer moving parts because it works on compressed air instead of electricity. “We used to have a couple of electric motors running in the process, but now there are none,” says Miller. Beyond reducing the noise by eliminating the motors, the unit reduces energy costs.

One of Miller’s main concerns about the compressed air was the flow rate required by the system. “We move about one cubic foot per conveying cycle, and I didn’t want to overwork the compressed air system, but it has not been a problem—it has worked very well,” he says. 

Of course, customer service is important in solving problems in an operation, too. “Our bulk bags are a little oddly sized, and the new rack didn’t fit them,” Miller explains. “I told my contact about the problem, and that very day he got an engineer on the phone who said, ‘we’ll build you a new one.’ In less than a week, a new rack arrived at the facility that was custom designed for the bags.”

For more information, call 888-241-6992 or 973- 759-4600; or visit www.vac-u-max.com.

Did you enjoy this article? Click here to subscribe to Food Engineering Magazine.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

Fabulous Food Plant: Paramount Citrus

Learn more about this fabulous food plant in Food Engineering's article, found here.

Podcasts

Burns & McDonnell project manager RJ Hope and senior project engineer Justin Hamilton discuss the distinctions between Food Safety and Food Defense as well as the implications for food manufacturers of the Food Safety Modernization Act.
More Podcasts

What was your favorite part of FA&M 2014?

View Results Poll Archive

THE MAGAZINE

Food Engineering Magazine

Food engineering magazine 2014 april cover

2014 April

Catch a preview of the Powder and Bulk Show in this April 2014 edition of Food Engineering. Also, be sure to check out a coffee stick making a real stir and a major advancement in the the pet food industry.
Table Of Contents Subscribe

THE FOOD ENGINEERING STORE

Food-Authentication-Flyer-(.gif
Food Authentication Using Bioorganic Molecules

This text provides critical tools and data needed to augment routine food analysis and enhance food safety by aiding in the detection of counterfeit, and potentially deleterious, foods.

More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

Food Master

Food Master Cover 2014Food Master 2014 is now available!

 

Where the buying process begins in the food and beverage manufacturing market. 

Visit www.foodmaster.com to learn more.

STAY CONNECTED

FE recent tweets

facebook_40.pngtwitter_40px.pngyoutube_40px.pnglinkedin_40px.png