Packaging

PACs aid carton maker

The dawn of the PLC Age in plant automation came three decades ago, greatly simplifying the wiring and integration challenges food engineers faced. But nothing lasts forever, including the venerable PLC, which is gradually giving way to the programmable automation controller (PAC).

PACs aid carton maker

The controls architecture at Evergreen Packaging’s Olmstead Falls, OH printing and converting facility is being overhauled, resulting in a safer and more productive work environment. Source: Evergreen Packaging.

 

Evergreen Packaging’s printing and converting facility in Olmstead Falls, OH had an early PLC installation, with a previous owner financing an automation upgrade 30 years ago. Time and technology had left the plant behind, however, before a decision to gut the existing controls architecture and install a new system was made. Design and installation took six months, though the related improvements have stretched the project to three years, according to Richard Stewart, senior project engineer at the Cleveland area plant.

The facility specializes in paperboard cartons, fabricating about 400,000 containers an hour in sizes ranging from four-oz. cartons for school milk programs to 64-oz. gable top units. Eight lines run 24/7, but outdated drives and obsolete software turned them into troubleshooting nightmares. Programming and configuring a line for a new carton was a five-step struggle, Stewart recalls, and relay logic still controlled the carton sealers. Today, “many of the changes needed are made through an HMI, and the operators do them,” he says. “That gives the operators better control over the process, which is nice.”

Operator changeovers and troubleshooting without drilling through multiple screens by a computer engineer are an obvious improvement from the days of the PLC, observes Leo Petrokonis, OEM business manager-packaging in Rockwell Automation Inc.’s Lancaster, PA office. Simplified changeover and operation are fundamental advantages of the Allen-Bradley CompactLogix PAC installed at Evergreen, but another essential element of the enabling technology is the Ethernet IP communications network that ties together motion control, safety controls, drives and discreet devices. By bundling and integrating all those systems, “you have the power of data,” says Petrokonis.

The panels that house Evergreen’s new hardware require about half the space as the old panels, says Stewart, and those panels rest on in-demand real estate on the shop floor. Since the new control technology was deployed, uptime has increased by about 25 percent, though the impact on OEE won’t be determined until a data historian is up and running. “It’s still a work in progress,” Stewart adds: While the initial conversion was a six-month effort, the overall automation upgrade has entered its fourth year.  

 

For more information:

Leo Petrokonis, Rockwell Automation Inc.,

414-382-2000, lpetrokonis@ra.rockwell.com

Did you enjoy this article? Click here to subscribe to Food Engineering Magazine.

Recent Articles by Kevin Higgins, Senior Editor

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

IPPE 2015

The 2015 International Production and Processing Expo (IPPE) was held in Atlanta at the Georgia World Congress Center, Jan. 27-29. More than 30,000 poultry, meat and feed industry representatives attended the event to interact with the 1,288 exhibitors on the show floor that covered more than 490,000 net square feet. At the show exhibitors demonstrated innovations in equipment, supplies and services utilized by firm in the production and processing of meat, poultry, eggs and feed products.

Podcasts

Burns & McDonnell project manager RJ Hope and senior project engineer Justin Hamilton discuss the distinctions between Food Safety and Food Defense as well as the implications for food manufacturers of the Food Safety Modernization Act.
More Podcasts

Food Engineering

Food Engineering February 2015 Cover

2015 February

In this February 2015 issue of Food Engineering, we explore how energy waste caused by leaks in compressed air, steam and water or faulty building insulation/seals can be reduced with the right equipment and knowledge.

Table Of Contents Subscribe

FSMA Audit

What is the is most important step you have taken to become ready for a FSMA audit?
View Results Poll Archive

THE FOOD ENGINEERING STORE

Food-Authentication-Flyer-(.gif
Food Authentication Using Bioorganic Molecules

This text provides critical tools and data needed to augment routine food analysis and enhance food safety by aiding in the detection of counterfeit, and potentially deleterious, foods.

More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

STAY CONNECTED

FE recent tweets

facebook_40.pngtwitter_40px.pngyoutube_40px.png linkedin_40px.pngGoogle +

Food Master

Food Engineering Food Master 2015Food Master 2015 is now available!

Where the buying process begins in the food and beverage manufacturing market. 

Visit www.foodmaster.com to learn more.