From Western France to the World

January 10, 2005
/ Print / Reprints /
ShareMore
/ Text Size+
Lactalis's expanded UHT plant produces 1.5 million liters a day, with a portion of it bound for foreign lands.

Vitré, France-There's a remarkably preserved medieval castle in this town of 25,000 about two hours west of Paris. The bastion is one of several in a latitudinal line which once formed a perimeter defense for the state of Bretagne in the heart of what is now one of France's most important agricultural and food processing regions.



This is the home of Camembert, the LeMans race course, and, in Vitré, one of the largest fluid milk plants in the country. The Groupe Lactalis facility not only produces more than 1.5 million liters of milk, baby formula, and juice daily, but it offers a bit of a history lesson as well, for anyone interested in the dairy industry.

"The very first Tetra Pak machine in France was installed in this plant in Vitré," says Plant Director Christophe Coquel, as he leads Dairy Foods on a plant visit. There are six Tetra Pak lines each producing up to 6,000 liters per hour. The historic Tetra Pak machine now makes its home in the company's Lactopôle Museum in neighboring Laval (see sidebar on page 106).

The six Tetra Pak lines are complemented by four aseptic plastic lines featuring Stork blow molding equipment and Serac fillers with double clean rooms. The fourth of these lines is housed in an expanded footprint of the plant and it came on line in mid-April.

Groupe Lactalis, is the second largest dairy company in France, and the country's number one exporter of dairy products. With more than $7 billion in annual revenue, it is one of the largest dairy processors in the world.



Six Tetra Pak lines at the Vitré plant help produce more than 1.5 million liters of packaged products daily.
The company's most prevalent segment is cheese which accounts for nearly half its business. Founded in Laval, a stone's throw from the Vitré plant, the company's cheese portfolio is primarily Camembert and Brie, but it also does a good deal of business in genuine Roquefort, which is aged in the caves on France's eastern edge.

But Lactalis also sells a great deal of milk and cream, industrial dairy products and a very small amount of milk-fed veal.

At the Vitré plant, the product mix is milk, baby formula, organic milk, and small amounts of goats milk and juice.



Focused on Fluid

"When this plant was built in 1968 all French dairy plants were required to produce a full line of products," Coquel says. "But in the 1980s we began to specialize, and the Vitré plant began to focus on fluid milk products."



Lactalis employs its own fleet of tanker trucks for raw milk collection.
The fourth plastic-bottle filling line was installed at a cost of more than EUR16 million or approximately $19 million. Other improvements are ongoing, including an expansion to the plant's finished product storage facilities.

About 80% of European milk is sold in aseptic, shelf stable packaging. Vitré is 100% UHT aseptic.

"We receive about 17 truck loads of milk per day, or about 1 million liters," Coquel says. "We run round the clock between six and seven days a week and we receive milk every day."

The milk is homogenized, and fat levels are set, then it is pasteurized, and sent for storage in one of nine silos until it is needed, generally for a maximum of 24 to 36 hours. For most products the fat level is set to 1.5%, the European standard of "semi-skim."

When the stored milk is needed for filling it is then UHT treated with a Stork serpentine helicolodial system before being sent to fillers.



Let there be light, or not

The Vitré facility has another feature that's rare in US dairy plants-natural light. Many rooms feature frosted glass skylights that let in a soft, diffused natural light that works in conjunction with the plant lighting. In the newest room, large plate glass windows in the walls provide a view of the French countryside while helping to provide a bright, well-lit work environment.



Two new Stork blow molders are among ten that produce bottles for the four aseptic bottle filling lines.
"Many studies have shown that employees are more productive when they have windows and natural light," Coquel says.

The individual lines are designed to execute uninterrupted runs of 36 to 48 hours, Coquel says. "Afterward we shut down and do a shift of clean-in-place and maintenance."

The Tetra Pak lines are configured for one-liter baseline bricks and one-liter square top cartons. Liter packages are typically bundled in six packs, or in three packs. Depending on the products, spout fitments may be applied to cartons and handles can be incorporated in the registered photo-printed overwrap used for bundling the multipacks.

On the Serac/Stork side of the Vitré plant, bottles are blown in three or six layers with a base material of white opaque HDPE. Bottles are filled in a variety of sizes ranging from quarter liter to one-liter.

While dairy employees may perform better in a well-lighted facility, dairy products, of course, prefer to be kept in the dark. While UHT milk needs no refrigeration, it may be even more important to protect it from light during its long shelf life. For this reason, a middle layer of carbon black is included as a light barrier in all plastic packages. Some products require protection from oxygen penetration, in which case an additional layer of ethylene vinyl alcohol (EVOH) is used in conjunction with an adhesion layer on either side of it.

For the new line, bottles are blowmolded on two machines, each sporting 14 heads. Each machine can produce 7,000 bottles per hour. All tolled, the plant has 10 blowmolding machines.

With shelf stable products, the integrity of the package is extremely important. Blowmolded bottles are tested for leaks in a vacuum chamber before a Posimat uscrambler directs them into a pneumatic conveying system. Plant personnel also do random sampling for structural integrity and wall thickness.

The four Serac fillers are housed in aseptic chambers within four separate clean rooms. Each has three levels of asepsis, beginning with the outer clean room then an inner chamber and then the filler itself. The clean rooms are fitted with a set of filters which remove progressively smaller particles from the air. Each chamber represents a 10-fold reduction over the previous. The chambers are pressurized with treated air. The most exacting is dioctyl phthalate (DOP) filter that removes any particles of 0.5 microns or larger.

Operators don sterile work clothes before entering the clean rooms.

The Serac fillers are rotary machines with either 24 or 30 heads depending on the line. Each is able to reach a speed of 12,000 to 18,000 bottles per hour.

A foil seal is applied with a pressure/thermal system that heats the top to 220°C for around four seconds. As the bottles leave the filler, they are sent to a sleever and heat tunnel for the application of full shrink sleeves, and then a resealable outer cap is applied.

For the Eveil baby formula line, some of the smallest bottles are fitted with a ready-to-use nipple fitment, for sale as a convenience, on-the-go item.



Warehouse and distribution

As with the paperboard packages, most product configurations are bundled into four or six pack multi-packs and a film outer wrap applied. Some products are put into corrugated cases, but many are sent directly to robotic palletizers which are capable of building case-less pallets. Ten separate palletizers are used.



The expansion at Vitré includes an additional filler line, this secondary packaging area, and additional product storage.
With the expansion completed, the Vitré plant will include three storage rooms with enough space to store 20,000 pallets. Sliding pallet racks allow easy inventory maintenance, and, as all product is aseptic, the warehouse utilizes simple climate control, and no refrigeration is needed.

Product is quarantined for a short period while batch samples are tested.

Baby formula products receive the most scrutiny and are held the longest.

From this warehouse space, UHT milk is sent to more than 50 countries around the world. About 20% of the milk and other fluid products packaged in Vitré are destined for export markets. While the Lactel brand is synonymous with milk in France, Lactalis's President brand is used for most of the products sold internationally. In France, President is reserved for cheese products.

In France, products are distributed to a variety of retail outlet types by a Lactalis fleet.

The Vitré plant has been certified to produce pure organic milk since 1995. Raw milk for the Bio Lactel brand, is stored in dedicated silos and processed and packaged on a dedicated line. The plant also utilizes a HACCP plan, and in order to avoid cross contamination, the product flow throughout the plant is configured so that there is no doubling back or crossover.

This article originally appeared in the October 2004 issue of Dairy Foods.



Plant Facts

Location: Vitré, France

Built: 1968

Recent expansion: Spring 2004

Current Size: 85,000 sq. feet

Number of lines: 10

Daily production: 1.5 million liters

Annual milk production: 350 million packages

Employees: 260

Products: 350

Product types: milk, baby formula, organic milk, goats milk, juice



Lactalis Facts

Headquarters: Laval, France

Founded: 1933

Ownership: Privately held by the Besnier family

Chief Executive: Michel Léonard

2003 sales: $7.2 billion

Plants: 65 in France, 15 elsewhere

Distribution: About 60% in France, exports to 140 countries

Employees: 16,500

Subsidiary: Sorrento Lactalis, US

Chief Brands: President, Lactel, Bridel, Société, Sorrento



For More Information:

Fillling Equipment:
TetraPak,
www.tetrapakusa.com
847/955-6000 (USA)

Serac,
www.serac-group.com.
+33 2 43 60 28 28 (FRA)

Blowmolding equipment:
Stork,
www.stork-usa.com
(770) 535-1875 (USA)

Controls:
Siemens,
www.siemens.com
+49 89 636-00 (GER)

Plastics:
BP Solvay
www.solvay.com

Sanitation:
Ecolab
www.ecolab.com
651/293-2233 (USA)

Did you enjoy this article? Click here to subscribe to Food Engineering Magazine.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

Fabulous Food Plant: Paramount Citrus

Learn more about this fabulous food plant in Food Engineering's article, found here.

Podcasts

Burns & McDonnell project manager RJ Hope and senior project engineer Justin Hamilton discuss the distinctions between Food Safety and Food Defense as well as the implications for food manufacturers of the Food Safety Modernization Act.
More Podcasts

What was your favorite part of FA&M 2014?

View Results Poll Archive

THE MAGAZINE

Food Engineering Magazine

Food engineering magazine 2014 april cover

2014 April

Catch a preview of the Powder and Bulk Show in this April 2014 edition of Food Engineering. Also, be sure to check out a coffee stick making a real stir and a major advancement in the the pet food industry.
Table Of Contents Subscribe

THE FOOD ENGINEERING STORE

Food-Authentication-Flyer-(.gif
Food Authentication Using Bioorganic Molecules

This text provides critical tools and data needed to augment routine food analysis and enhance food safety by aiding in the detection of counterfeit, and potentially deleterious, foods.

More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

Food Master

Food Master Cover 2014Food Master 2014 is now available!

 

Where the buying process begins in the food and beverage manufacturing market. 

Visit www.foodmaster.com to learn more.

STAY CONNECTED

FE recent tweets

facebook_40.pngtwitter_40px.pngyoutube_40px.pnglinkedin_40px.png