Grinding away downtime

February 8, 2006
/ Print / Reprints /
ShareMore
/ Text Size+
A flavor extraction operation installs a new rotary knife cutter and increases uptime.

A new SCC 30 rotary cutter from Munson Machinery helps Givaudan grind vanilla beans at a rate of 3,000 lbs./hr. Source: Munson Machinery.


Vanilla beans from Madagascar, cinnamon bark from Sri Lanka, ginger roots from Nigeria and other natural flavors you enjoy have likely come from East Hanover, NJ-based Givaudan Flavors Corp., which extracts flavor from natural products, concentrates, packages and markets it to food and beverage manufacturers.

Givaudan processes these and other natural ingredients on a mass scale, placing high demands on its size-reduction equipment, grinding upwards of 6,000 lbs./hr. of ginger root, cassia bark or cola nuts and cutting about 3,000 lbs./hr. of vanilla beans to uniformly sized chips, within the relatively tight tolerances required for efficient flavor extraction.

During the process, organic raw materials are forklifted to the second floor of the plant and dumped into any of four dumping stations terminating at size-reduction equipment located below on a first floor mezzanine. To help with this part of the process, Givaudan relies on a rotary cutter, hammermill and roller mill to reduce material to uniform size chips, presenting the best surface area for liquid extraction of flavors.

After a bulk bag is filled with ground material, a chain hoist lifts the bag for emptying into one of several box extractors or 20-ft. high conical extractors. Liquid flavor is derived from vanilla beans, for example, at a 1:10 ratio, says Joe Bush, basic products maintenance supervisor.

Throughput of 6,000 lbs./hr. of tough, hard roots, beans and nuts places high demand on the blades of the rotary knife cutter, which must be very rugged to handle the impact, yet give a precise cut with minimum fines and dust. Givuadan needed to replace its older rotary cutter with one that could handle these tough tasks and keep downtime to a minimum.

According to Bush, the Munson SCC 30 rotary knife Givuadan selected does just that thanks to efficient blade replacement, which Givaudan performs every six months. He says blade changing takes four hours now compared to one-and-a-half days with the previous knife cutter. The five rotor knives and four stationary knives fit into slots for easy bolting and unbolting. Additional time saving derives from a Munson tool for adjusting the clearance between the rotor and stationary knives. The rotary knife cutter this machine replaced required lengthy measurement and adjustment of knife clearance with a feeler gauge.

The former knife cutter attained a throughput rate of 1,990 lbs./hr. with a 60 hp motor, where the Munson unit, driven by a 20 hp variable speed drive at 550 rpm, triples that rate. Also, a wider 270-degree screen permits higher throughput compared to the replaced cutter's 120-degree screen area.

With a second Munson machine, a stainless steel screen classifying cutter, Givaudan chops vanilla beans at a rate of 3,000 lbs./hr. The rotary cutter attains high throughput with a helical rotor assembly of dozens of interconnected parallelogram-shaped cutters, each holding two tungsten carbide cutter inserts. Cutting action occurs as the carbide tips pass within thousandths of an inch of two stationary bed knives. The rotor configuration produces a spiral cutting and feeding effect.

The carbide inserts are replaceable, but Bush replaces the entire rotor assembly every three years, since the tungsten carbide teeth last long even in this abrasive application. "Cleaning of the rotary and knife cutters between batches proceeds rapidly," says Bush. The operator flushes out the cutting chambers with nitrogen and rinses with water.

For more information:
Munson Machinery Co.;
800-944-6644;
info@munsonmachinery.com



Links

Did you enjoy this article? Click here to subscribe to Food Engineering Magazine.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

Plant of the Year 2014

Blue Diamond Growers was chosen as Food Engineering's 2014 Plant of the Year. The Sacramento-based company is the world’s largest producer of almonds and almond ingredients.

Podcasts

Burns & McDonnell project manager RJ Hope and senior project engineer Justin Hamilton discuss the distinctions between Food Safety and Food Defense as well as the implications for food manufacturers of the Food Safety Modernization Act.
More Podcasts

FSMA Audit

What is the is most important step you have taken to become ready for a FSMA audit?
View Results Poll Archive

Food Engineering

FE August 2014

2014 August

The August 2014 issue of Food Engineering explores how your operation could be doing more to create a culture of employee engagement. Also, read more on how your business and insurance partners must know the basics of your business and its nuances as well.

Table Of Contents Subscribe

THE FOOD ENGINEERING STORE

Food-Authentication-Flyer-(.gif
Food Authentication Using Bioorganic Molecules

This text provides critical tools and data needed to augment routine food analysis and enhance food safety by aiding in the detection of counterfeit, and potentially deleterious, foods.

More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

Food Master

Food Master Cover 2014Food Master 2014 is now available!

Where the buying process begins in the food and beverage manufacturing market. 

Visit www.foodmaster.com to learn more.

STAY CONNECTED

FE recent tweets

facebook_40.pngtwitter_40px.pngyoutube_40px.png linkedin_40px.pngGoogle +