Keep the rust out

January 1, 2007
/ Print / Reprints /
/ Text Size+

Marathon bearings replace OEM units that are prone to rust and corrosion. Source: MRC Bearing Services.

Pilgrim’s Pride Corporation, the world’s leading chicken producer, can’t afford production downtime for unscheduled maintenance. This is especially true of its cook plant in Farmerville, LA, which had been experiencing premature rusting problems with OEM bearings in many of its production machines. It didn’t make sense to replace the rusting bearings with more of the same, which must endure exposure to aggressive washdown chemicals, heavy loads and high temperatures in some equipment.

To put an end to frequent machine stoppages, the plant began a bearing retrofit program. Original standard and stylus cast-iron bearings have been replaced as needed with Marathon extreme-duty stainless steel mounted bearing units manufactured by MRC Bearing Services.

“The MRC bearings can handle the washdowns, weights and speeds involved in our applications,” says Mark Higdon, maintenance manager at Farmerville. “They’re high performance and sturdy.” Most bearing applications at the plant support conveyors transporting prepared foods such as buffalo wings and chicken tenders into ovens for the process of cooking to brown.

The cook plant runs four production lines, and the daily high-pressure washdowns take their toll on OEM bearings. Composite bearings, which offer corrosion resistance, were tried as a potential solution. “But the heat from our ovens caused cracks and distortion in the composite bearing housings,” Higdon recalls. “We learned quickly that durability of the bearings was as much an issue as corrosion resistance in our application.” Higdon confirms the bearings have proven a good fit for several reasons, including their construction, design, sealing arrangement and installation procedure.

Marathon XD AISI 300 cast stainless steel housings were designed specifically for poultry processing applications. The bases are cast flat with no recesses, and the exposed surfaces of the housings have no unnecessary crevices or pockets. Smooth cast surfaces minimize trapped material to allow for more thorough cleaning. A stainless steel sealing arrangement keeps out water and provides longer bearing service life and performance. The arrangement consists of a double-lip, AISI 304 stainless steel insert seal, an AISI 304 stainless steel flinger and a rubber-backed seal gasket.

From Higdon’s perspective, the bearing units substantially reduce his staff’s time, effort, and costs. Unlike units in the original equipment, the new bearings come prelubricated-for-life. Without a need to regrease the bearings, there is no chance for over- or under-lubricating and no chance for related bearing failures.

The production lines use a wide range of bore sizes (including 3/4 in., 1 in., 1-1/4 in. and 1-7/16 in. as well as 20 mm, 25 mm and 30 mm) and several housing styles (pillow block and two- and four-bolt flange). All sizes and styles have proved timely and cost-effective to install.  “We simply bolt them up to the existing bolt pattern, and they become drop-in replacements,” says Higdon. “They serve our retrofit program especially well with their easy installation and improved function.”

The Farmerville facility originated as a test site for new products and has since become one of the dozens of key production and processing plants operated by Pilgrim’s Pride throughout the US, Mexico and Puerto Rico. A similar successful retrofit program specifying Marathon bearings was implemented at another Pilgrim’s Pride plant in Texas.u

For more information:

Jay S. Carlson, MRC Bearing Services;


Did you enjoy this article? Click here to subscribe to Food Engineering Magazine.

You must login or register in order to post a comment.



Image Galleries

Plant of the Year 2014

Blue Diamond Growers was chosen as Food Engineering's 2014 Plant of the Year. The Sacramento-based company is the world’s largest producer of almonds and almond ingredients.


Burns & McDonnell project manager RJ Hope and senior project engineer Justin Hamilton discuss the distinctions between Food Safety and Food Defense as well as the implications for food manufacturers of the Food Safety Modernization Act.
More Podcasts

FSMA Audit

What is the is most important step you have taken to become ready for a FSMA audit?
View Results Poll Archive

Food Engineering

FE September 2014

2014 September

The September 2014 issue of Food Engineering explores how lean manufacturing, quality improvements and increased automation helps processors meet rapidly changing demands. Also, read how robotics, advanced machine controls, software and OEE are just a few of the tools that can boost productivity on packaging lines.

Table Of Contents Subscribe


Food Authentication Using Bioorganic Molecules

This text provides critical tools and data needed to augment routine food analysis and enhance food safety by aiding in the detection of counterfeit, and potentially deleterious, foods.

More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

Food Master

Food Master Cover 2014Food Master 2014 is now available!

Where the buying process begins in the food and beverage manufacturing market. 

Visit to learn more.


FE recent tweets

facebook_40.pngtwitter_40px.pngyoutube_40px.png linkedin_40px.pngGoogle +