Columns

Engineering a "fish-dry"

March 22, 2003
/ Print / Reprints /
ShareMore
/ Text Size+
New world technology brings old-world practice into the 21st Century

For centuries, the art of drying fish hadn't changed much on the famed Gaspe Coast in Quebec, Canada, where a handful of fisheries dried their world-renowned North Atlantic cod by sunlight. But that was before a consulting engineer customized existing HVAC technology to improve the productivity, shipment, scheduling and taste of the cod.

Instead of depending on the unpredictable outdoor drying process, which requires at least a week of steady sunshine, fish processor Lelievre, Lelievre and Lemoignan (LLL), Sainte-Therese de Gaspe, Quebec, now uses two custom-manufactured DF-60 Dry-O-Tron dehumidifiers by manufacturer Dectron Internationale of Roswell, Ga. The dehumidifiers supply dry air to racks of fresh cod for 32 to 36 hours in dual custom-fabricated sheet metal drying tunnels inside LLL's 100,000-sq.-ft. headquarters. The air distribution design, 6-ft. by 6-ft. by 40-ft.-long tunnels and equipment specifications were handled by mechanical designer Le Groupe Prodapec Inc., a St. Jerome, Quebec-based consultant specializing in turn-key dehumidification and drying projects.

"We're fulfilling orders more accurately than ever because we can now depend on the product drying and being ready on a predetermined date," said LLL president Rock Lelievre.

In addition to improving product quality, the new high-tech drying process cut labor costs associated with outdoor drying by up to 80 percent. The former drying process required covering the fish every night. Additional labor was required during rainy periods in order to protect the fish from the inclement weather. Flash rains could reduce hundreds of pounds of fish from a potential Class A to Class C product rating, resulting in a 20 to 40 percent reduction in profit margins.

An alternative to outdoor drying is a standard furnace and tunnel arrangement. However, furnaces are inefficient for fish drying because of the large amount of exhaust air that's required. When the airflow absorbs moisture from the fish, half of the return air must be exhausted while the remaining half is mixed with dry outside air that requires additional heating.

For LLL, using dehumidifiers proved to be the best alternative. The entire process starts with a fish catch. The fish are prepared and split in half before the first-stage curing process of soaking them in a salt-water solution. They are then piled and rotated on pallets for another period during the second curing stage to begin the water elimination process. Finally, the fish are loaded on custom-designed portable racks before they are subjected to the tunnel process. There's no cooking danger with the mechanical process because drying is precisely controlled with a low temperature of 68 degrees F.

The dehumidifiers are controlled with Dectron's HT-800 microprocessor to provide three relative humidity stages ranging from 60 percent in the beginning to 25 percent at the end. "Although energy costs are constantly shifting because of the varying sensible heat ratio of the drier air throughout the cycle, our calculations tell us that 1-kwhr. is required to remove 4.25 pounds of moisture," said Jean-Guy Ferland, partner with Le Groupe Prodapec and designer of the LLL tunnel installation.

Dectron, Inc., 995 Mansell Rd., Suite B, Roswell, GA 30076. Tel. (770) 649-0102; fax (770) 649-0243; www.dectron.com

Did you enjoy this article? Click here to subscribe to Food Engineering Magazine.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

Fabulous Food Plant: Paramount Citrus

Learn more about this fabulous food plant in Food Engineering's article, found here.

Podcasts

Burns & McDonnell project manager RJ Hope and senior project engineer Justin Hamilton discuss the distinctions between Food Safety and Food Defense as well as the implications for food manufacturers of the Food Safety Modernization Act.
More Podcasts

THE MAGAZINE

Food Engineering Magazine

Food engineering magazine 2014 april cover

2014 April

Catch a preview of the Powder and Bulk Show in this April 2014 edition of Food Engineering. Also, be sure to check out a coffee stick making a real stir and a major advancement in the the pet food industry.
Table Of Contents Subscribe

THE FOOD ENGINEERING STORE

Food-Authentication-Flyer-(.gif
Food Authentication Using Bioorganic Molecules

This text provides critical tools and data needed to augment routine food analysis and enhance food safety by aiding in the detection of counterfeit, and potentially deleterious, foods.

More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

Food Master

Food Master Cover 2014Food Master 2014 is now available!

 

Where the buying process begins in the food and beverage manufacturing market. 

Visit www.foodmaster.com to learn more.

STAY CONNECTED

FE recent tweets

facebook_40.pngtwitter_40px.pngyoutube_40px.pnglinkedin_40px.png