Columns

Field Reports: Room to grow,
How sweet it is

October 6, 2003
/ Print / Reprints /
ShareMore
/ Text Size+
Screener provides increased productivity and efficiency in small footprint.

Redpath Sugar’s Megatex M100 evenly splits and distributes the incoming flow of sugar to stacked 4-ft. x 8-ft. screen decks, the equivalent of a bank of four screeners in one machine. Source: Rotex, Inc.
Whether it’s in the home, office or manufacturing plant, for most of us space is a commodity. The amount we have and what can be accomplished within it are often parameters for our success. Process Engineer Colin Flock knows the importance of space and the implications limited space can have on manufacturing. Flock works for Redpath Sugar, Canada’s first sugar refinery. Located in Toronto, Redpath Sugar is part of the North American Division of Tate & Lyle PLC, a producer of carbohydrate ingredients. Redpath’s Toronto facility handles all refining while distribution and warehousing is handled by a facility in Montreal.

In early 2000, Flock was developing plans for the installation of new sugar screeners in the Toronto facility when space – the amount he had and the amount he didn’t – became an issue. “The space I had to work with is between four pillars and measures about 15-ft. square. The severe space limitation quickly eliminated a number of conventional screeners that might have been considered for the new installation because their footprint was simply too large,” says Flock.

Sugar screeners play a critical role near the end of sugar processing. After white granulated sugar crystals have been dried, various size crystals are still present. Since Redpath’s sugar is sold in specific ranges of crystal size, the mixture must be sorted to obtain granular sizes that correspond to its products. Despite the refinery’s size, finding room in the buildings to expand and install new processing equipment to meet higher production needs was a challenge.

Based on Redpath’s previous experience with Rotex, Flock selected the Rotex Megatex M100 series screener. With 120-sq. ft. of screening area, the M100 reduced capital outlay as well as installation, operation and floor space costs. “The 10-ft. x 10-ft. x 12-ft. footprint of the Megatex fit perfectly in the space available. It also met all our volume requirements,” says Flock.

The Megatex’s design offers wide screens and long-stroke, gyratory motion to increase productivity. It evenly splits and distributes the incoming flow of sugar to stacked 4-ft. x 8-ft. screen decks—the equivalent of a bank of four screeners in a single machine. Using screen surfaces that are wider, rather than longer, reduces bed depth.

To further achieve a wide screening area, Megatex uses a two-bank, multi-level screen deck arrangement to present 16-ft. to 50-ft. of width to the feed, which keeps bed depth low and maintains screen accuracy and efficiency at high capacities. The screener also uses a long stroke and low frequency motion to produce ball mesh cleaning to control screen blinding and provide uninterrupted operation.

Flock has been impressed with the equipment’s performance, so much so that the company plans to allocate space for two more M100 series screeners. “We’re very pleased with the results,” says Flock. “The Megatex is exceptionally efficient.”

For more information:
Rob Scheper, 800-453-2321
info@rotex.com.

Did you enjoy this article? Click here to subscribe to Food Engineering Magazine.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

Plant of the Year 2014

Blue Diamond Growers was chosen as Food Engineering's 2014 Plant of the Year. The Sacramento-based company is the world’s largest producer of almonds and almond ingredients.

Podcasts

Burns & McDonnell project manager RJ Hope and senior project engineer Justin Hamilton discuss the distinctions between Food Safety and Food Defense as well as the implications for food manufacturers of the Food Safety Modernization Act.
More Podcasts

FSMA Audit

What is the is most important step you have taken to become ready for a FSMA audit?
View Results Poll Archive

Food Engineering

FE September 2014

2014 September

The September 2014 issue of Food Engineering explores how lean manufacturing, quality improvements and increased automation helps processors meet rapidly changing demands. Also, read how robotics, advanced machine controls, software and OEE are just a few of the tools that can boost productivity on packaging lines.

Table Of Contents Subscribe

THE FOOD ENGINEERING STORE

Food-Authentication-Flyer-(.gif
Food Authentication Using Bioorganic Molecules

This text provides critical tools and data needed to augment routine food analysis and enhance food safety by aiding in the detection of counterfeit, and potentially deleterious, foods.

More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

Food Master

Food Master Cover 2014Food Master 2014 is now available!

Where the buying process begins in the food and beverage manufacturing market. 

Visit www.foodmaster.com to learn more.

STAY CONNECTED

FE recent tweets

facebook_40.pngtwitter_40px.pngyoutube_40px.png linkedin_40px.pngGoogle +