Manufacturing News

Pump Inducer Lowers NPSHR

March 28, 2003
/ Print / Reprints /
ShareMore
/ Text Size+
Sanitary pumps and industrial pumps are rarely discussed in an apples-to-apples comparison. Industrial pumps, especially those used in boiler feed applications, do not look or act like sanitary pumps.

When Leprino Foods, Roswell, NM needed to replace its bulky, cast iron/bronze-fitted industrial-grade boiler feed pumps, it considered all options. “Pump conditions for boiler applications include high temperatures, high pressures and the heightened risk of cavitation due to suction head pressure differentials,” says Tim Hutcheson, plant engineering manager.

Pump cavitation is an audible implosion of entrained gases due to suction pressure differences within the pump. Because of reduced space in the boiler room and the resulting increase in downtime and maintenance, Leprino broke from tradition and installed three Wi 70/30-series high efficiency centrifugal pumps from APV Fluid Handling.

Typically, boiler feed or condensate recycling pumps handle condensate with temperatures up to 200° F where the net positive suction head required (NPSHR) is low enough to prevent cavitation. There are actually two values of NPSH: NPSHR (required) and NPSHA (available). NPSHR refers to the minimum suction pressure required to prevent cavitation and is determined by pump design. NPSHA is calculated using pressure, temperature and tank elevation measurements of the specific application. When the “required” value rises above the “available” suction, cavitation results.

This can be corrected either by raising the NPSHA through process parameter manipulation, or reducing the NPSHR through pump design. “Construction in the boiler room reduced overhead space and thereby reduced the NPSHA,” notes Hutcheson. “This led to pump cavitation and increased maintenance and repair requirements on the existing pumps. We needed to install a pump with a much lower NPSHR to compensate.”

APV’s W-series pumps have the patented Universal Inducer, which is an auger-type device located at the eye of the impellers in place of the impeller nut. This helical screw rotates at impeller speed raising the inlet pressure to the pump thereby lowering the NPSHR by 50 to 70 percent.

“Our condensate enters the 40-hp pump at 227° F and about 15.5 psi,” says Hutcheson. “It pulls water from our de-aeration tank and pumps it directly to the boiler for use in making steam for plant operations. We have found no other pump of this size having its capabilities.” Hutcheson reports decreasing downtime dramatically, and very little maintenance. “I think we replaced one mechanical seal during the past two years.”

APV Fluid Handling America, 100 South CP Ave., Lake Mills, WI 53551 Tel: 920-648-8311 Fax: 920-648-1590.

Did you enjoy this article? Click here to subscribe to Food Engineering Magazine.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

Plant of the Year 2014

Blue Diamond Growers was chosen as Food Engineering's 2014 Plant of the Year. The Sacramento-based company is the world’s largest producer of almonds and almond ingredients.

Podcasts

Burns & McDonnell project manager RJ Hope and senior project engineer Justin Hamilton discuss the distinctions between Food Safety and Food Defense as well as the implications for food manufacturers of the Food Safety Modernization Act.
More Podcasts

FSMA Audit

What is the is most important step you have taken to become ready for a FSMA audit?
View Results Poll Archive

Food Engineering

FE September 2014

2014 September

The September 2014 issue of Food Engineering explores how lean manufacturing, quality improvements and increased automation helps processors meet rapidly changing demands. Also, read how robotics, advanced machine controls, software and OEE are just a few of the tools that can boost productivity on packaging lines.

Table Of Contents Subscribe

THE FOOD ENGINEERING STORE

Food-Authentication-Flyer-(.gif
Food Authentication Using Bioorganic Molecules

This text provides critical tools and data needed to augment routine food analysis and enhance food safety by aiding in the detection of counterfeit, and potentially deleterious, foods.

More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

Food Master

Food Master Cover 2014Food Master 2014 is now available!

Where the buying process begins in the food and beverage manufacturing market. 

Visit www.foodmaster.com to learn more.

STAY CONNECTED

FE recent tweets

facebook_40.pngtwitter_40px.pngyoutube_40px.png linkedin_40px.pngGoogle +