Manufacturing News

BPA in canned foods rears its head as a manufacturing issue

December 1, 2009
/ Print / Reprints /
ShareMore
/ Text Size+
A recent story in Consumer Reports

A recent story in Consumer Reports revealed potentially dangerous levels of bisphenol-A (BPA) in canned foods caused by epoxy-based linings. A 2007 study from the Environmental Working (EWG) Group found similar results; the study found unsafe levels of BPA in one of every 10 servings of canned foods and one of every three cans of infant formula. According to an EWG spokesman, the Food and Drug Administration has been dragging its feet for several years in developing new regulations prohibiting the use of BPA in can linings. But finding an effective substitute isn’t easy.

Steven G. Hentges, PhD, of the Polycarbonate/BPA Global Group of the American Chemistry Council argues, “Epoxy resins made from BPA are approved by the US FDA to line food and beverage cans in order to help prevent corrosion, contamination and food spoilage.” John Rost, chairman of the North American Metal Packaging Alliance, adds that there hasn’t been a food-borne illness resulting from a failure of metal packaging in the US for more than 30 years, according to FDA records.

While manufacturers of baby bottles have converted from materials containing BPA to safer materials, the solution is not so easy for can manufacturers. According to Mark Novotny, marketing manager for Nordson Corporation, the interest in non-epoxy powder coatings, which eliminate the use of dangerous solvents, is on the rise as can manufacturers look for non-BPA alternatives. Novotny explained that several can manufacturers and food processors are testing packs with non-BPA powder coatings.

Rost suggests that new non-BPA technologies, which have not performed as well in tests as epoxy resins, will not have the equivalent shelf life and will need time to prove themselves in terms of longevity and food safety.

Michael Potter, president of Eden Foods, found a non-BPA alternative for low-acid canned goods that actually predates epoxy resins-oleo-based C-enamel linings. In 1999, when Potter learned that BPA was a problem, he began investigating other materials and discovered a non-BPA can. He notes, however, that high-acidity foods such as tomato sauce still have to be packaged in epoxy-lined cans or glass.

Potter believes that Eden is the only processor currently using non-BPA cans.

Did you enjoy this article? Click here to subscribe to Food Engineering Magazine.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

Plant of the Year 2014

Blue Diamond Growers was chosen as Food Engineering's 2014 Plant of the Year. The Sacramento-based company is the world’s largest producer of almonds and almond ingredients.

Podcasts

Burns & McDonnell project manager RJ Hope and senior project engineer Justin Hamilton discuss the distinctions between Food Safety and Food Defense as well as the implications for food manufacturers of the Food Safety Modernization Act.
More Podcasts

FSMA Audit

What is the is most important step you have taken to become ready for a FSMA audit?
View Results Poll Archive

Food Engineering

FE September 2014

2014 September

The September 2014 issue of Food Engineering explores how lean manufacturing, quality improvements and increased automation helps processors meet rapidly changing demands. Also, read how robotics, advanced machine controls, software and OEE are just a few of the tools that can boost productivity on packaging lines.

Table Of Contents Subscribe

THE FOOD ENGINEERING STORE

Food-Authentication-Flyer-(.gif
Food Authentication Using Bioorganic Molecules

This text provides critical tools and data needed to augment routine food analysis and enhance food safety by aiding in the detection of counterfeit, and potentially deleterious, foods.

More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

Food Master

Food Master Cover 2014Food Master 2014 is now available!

Where the buying process begins in the food and beverage manufacturing market. 

Visit www.foodmaster.com to learn more.

STAY CONNECTED

FE recent tweets

facebook_40.pngtwitter_40px.pngyoutube_40px.png linkedin_40px.pngGoogle +