Food Packaging: The can kicks back

March 27, 2003
/ Print / Reprints /
/ Text Size+
Conversions Out Of Metal And Into Pouches And Other Packaging Alternatives Have Been Snowballing, But Can Makers Believe Two Can Play The Innovation Game.

Concave lids are the most noticeable difference, but 40 percent less steel and internal pressure really set apart Ingenium Packaging LLC’s new cans.

Like most European food processors, Scotland's Baxters of Speyside Ltd. provides easy-open lids on its metal cans.
Superior form explains the food industry’s shift away from metal and glass and into plastic packaging, even though modern materials usually can’t match the function of the containers they replace.

North America’s food manufacturers use almost 31 billion metal food cans a year, according to Maggie Springer, marketing strategist with Akron, Ohio-based Ingenium Packaging LLC. Processors have been divesting their captive can-making units in droves since 1990, leaving three firms with 85 percent of the market: Silgan Holdings, Crown Cork & Seal and Ball Corp. “The can industry has sat there for two decades without innovating,” Springer maintains, so the surviving firms are chasing a flat growth curve.

Ingenium’s solution is a thin wall, pressurized can with a concave end, a sterilizable packaging solution invented by George B. Diamond and patented four years ago. Though the cans use 40 percent less steel than conventional units to deliver a more rigid structure, Ingenium’s efforts to license the technology failed because can makers were reluctant to agree to sell the units for less. As a result, Ingenium is building a production facility in Emporia, Kan., with a second plant in Alliance, Ohio, on the drawing board.

Liquid nitrogen dosing and a vacuum are used to create up to 20 psi of internal pressure in the cans prior to retort. That pressure prevents outside air from being drawn into the can during cool down, a major cause of post-processing contamination. If a pinhole exists in the can, it emerges from the retort as an easily detected limp unit.

Four decades have lapsed since the pop-top beverage can debuted. Only in recent years have food can manufacturers taken a stab at incorporating this convenience feature, often with lukewarm success. To maintain packaging integrity, early versions of self-opening cans required opening force that was anything but easy. As a consequence, only 10 percent of U.S. food cans sport an easy-open lid, though several major processors have begun adding this feature.

Campbell’s ready-to-serve soups began appearing with pop tops in 2001, though its condensed soups remain in traditional cans. Nestle’s pet-care division introduced the EZOpen lid on cans of Alpo dog food last year, and other manufacturers are following suit.

“Finding the proper balance between pop force and tear-and-peel force for easy-open metal cans has been a challenge,” allows Raymond L. McGowan Jr., who recently was named president of the U.S. food can division of Crown Cork & Seal. The company is rolling out the third iteration of its Easy Opening, Low Energy (EOLE) ends, which incorporate seeming changes and other refinements. The force needed to pop the lids is about half that of the first generation EOLE ends, McGowan says, and tear force also has been reduced.

Shaping technology is another innovation that can makers hope will add sizzle to their packaging and help them compete more effectively with rigid and flexible plastic enclosures. Beer manufacturers blazed this trail with 24 oz. Heineken’s pub cans and Adolph Coors’ Killian’s sleeved aluminum cans, and the same concept is being applied to steel cans.

Did you enjoy this article? Click here to subscribe to Food Engineering Magazine.

You must login or register in order to post a comment.



Image Galleries

Plant of the Year 2014

Blue Diamond Growers was chosen as Food Engineering's 2014 Plant of the Year. The Sacramento-based company is the world’s largest producer of almonds and almond ingredients.


Burns & McDonnell project manager RJ Hope and senior project engineer Justin Hamilton discuss the distinctions between Food Safety and Food Defense as well as the implications for food manufacturers of the Food Safety Modernization Act.
More Podcasts

FSMA Audit

What is the is most important step you have taken to become ready for a FSMA audit?
View Results Poll Archive

Food Engineering

FE September 2014

2014 September

The September 2014 issue of Food Engineering explores how lean manufacturing, quality improvements and increased automation helps processors meet rapidly changing demands. Also, read how robotics, advanced machine controls, software and OEE are just a few of the tools that can boost productivity on packaging lines.

Table Of Contents Subscribe


Food Authentication Using Bioorganic Molecules

This text provides critical tools and data needed to augment routine food analysis and enhance food safety by aiding in the detection of counterfeit, and potentially deleterious, foods.

More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

Food Master

Food Master Cover 2014Food Master 2014 is now available!

Where the buying process begins in the food and beverage manufacturing market. 

Visit to learn more.


FE recent tweets

facebook_40.pngtwitter_40px.pngyoutube_40px.png linkedin_40px.pngGoogle +