Dry Processing

Powder induction

By Wayne Labs, Senior Contributing Technical Editor

Powder Technologies’ YSTRAL Conti-TDS offers powder induction, wetting and dispersing of an agglomerate-free liquid using the same machine. It has been certified by 3-A Sanitary Standards, Inc. (3-A SSI) to meet its sanitary standards and carry the 3-A symbol. All product contact surfaces of the machine meet the 3-A design criteria. The system operates dust free and loss free and offers clean-in-place without disassembly.

Powder Technologies, Inc.; 609-914-0521; www.powdertechusa.com

Looking for a reprint of this article?
From high-res PDFs to custom plaques, order your copy today!

Wayne Labs has more than 30 years of editorial experience in industrial automation. He served as senior technical editor for I&CS/Control Solutions magazine for 18 years where he covered software, control system hardware and sensors/transmitters. Labs ran his own consulting business and contributed feature articles to Electronic Design, Control, Control Design, Industrial Networking and Food Engineering magazines. Before joining Food Engineering, he served as a senior technical editor for Omega Engineering Inc. Labs also worked in wireless systems and served as a field engineer for GE’s Mobile Communications Division and as a systems engineer for Bucks County Emergency Services. In addition to writing technical feature articles, Wayne covers FE’s Engineering R&D section.