Model 180A has a 225-lb. hopper with a counter-balanced safety interlocked lid.

Using computational fluid dynamics (CFD) techniques to optimize airflow within the filter, the company was able to reduce the length of the filter bags from up to 7 meters to just 4.5 meters.

ATEX-certified centrifugal sifters are suitable for installation in ATEX zone 20 internal and zone 21 external and are certified to provide a high level of protection in areas where an explosive atmosphere with a cloud of combustible dust is likely to occur or remain present continuously or for long periods during normal operation.

The company developed a custom unloading frame with no traditional upper section but where two bags could empty simultaneously in side-by-side configuration.

The Quantum Orifice Gate is designed to handle dry bulk solids in gravity flow, dilute phase or vacuum conveying systems with pressures up to 15 psig (1 barg) depending on size.

Model HATSB is designed for places where headroom is not limited and is available from 2- to 40-ton capacities with outside spreads that adjust from a minimum of 4 to 6 ft. to a maximum of 12 to 20 ft. as standard.

The low-profile bulk bag filler for dairy and other food powders has all stainless steel construction, simple operator controls and is easy to clean.

Flo system is suitable for dry food ingredients including coarse grains, fine spices and additives, as well as sticky dusts such as sugar and whey.

The lift and dump unit is designed to safely discharge material into an existing process at 16 ft. above floor level.