The Low Headroom Material Master bulk bag discharger has a discharge spout closure system to stop material flow for partial bag discharge, allowing the bag to be retied and removed.
Tolomatic servo and stepper drives can be controlled from a PLC or master controller via 24VDC digital I/O, 0 to 10VDC or 4 to 20mA analog I/O, Ethernet or Modbus RTU over RS-485 (EtherNet/IP or Modbus TCP protocols).
Nanotec SC3518 series 2-phase hybrid stepper motors have a NEMA 14 35mm frame and a 1.8° step angle; depending on motor length, torque is between 0.18 and 0.32 Nm.
Designed to prevent product from being heated in pressure conveying systems, Xchanger AA heat exchangers use an aluminum plate-fin core with alternating finned flow channels to cool the conveying air close to ambient temperature.
Serving as drop-in replacements for all inch-sized linear ball bearings, LM76 FDA- and USDA-compliant bearings measure from 1/4 to 1 1/2 in. in size; they are available in closed and open configurations.
The Dorner 2200 Series Precision Move pallet conveyor system has a pin tracking system that guides 160 to 480mm pallets through 90° turns; the pallets move on twin dual-strand timing belt conveyors.
RSS