Refrigerants/Condensers/Evaporators
Klüber Lubrication Launches Synthetic Refrigeration Oils for U.S. Food Processors

Klüber Lubrication is bringing its fully synthetic Klüberoil NH1 SUL 4 US Series to the U.S. food-processing market.
Developed for heavily loaded refrigeration compressors, the oils are primarily intended for systems using ammonia (NH3) or carbon dioxide (CO2). They can also be used with natural hydrocarbon refrigerants, including propane, propylene and butane.
Lubricants can influence friction, oil carryover, compressor reliability and maintenance requirements. Fully synthetic oils combine high thermal and chemical stability with good low-temperature flow behavior, helping refrigeration systems operate efficiently across demanding conditions.
Formulated with polyalphaolefin, the Klüberoil NH1 SUL 4 US Series spans viscosity grades from ISO VG 32 to ISO VG 150. These paraffin-free, synthetic hydrocarbon oils also offer compatibility with fluorinated refrigerants and methyl chloride and fully disperse in petroleum-based fluids. The different grades are used in reciprocating-piston and screw compressors according to the compressor manufacturer's specifications.
The oils’ low solubility in ammonia and carbon dioxide promotes the formation of a greater lubricant-film thickness at the lubrication point. The oils' chemical stability and low vapor pressure reduce oil carryover and vapor content. These properties can lower oil consumption and prevent oil from contaminating the refrigerant, thereby improving refrigeration efficiency. Furthermore, long oil change intervals and extended oil filter and oil separator lifetimes further decrease maintenance and operating costs.
Within the series, Klüberoil NH1 SUL 4-200 US has a kinematic viscosity of approximately 68 mm²/s at 40°C and 10 mm²/s at 100°C. Its viscosity index is at least 130, while its pour point is −51°C or below. This viscosity-temperature profile supports reliable oil circulation at low temperatures and consistent lubrication as operating temperatures change.
Klüberoil NH1 SUL 4-200 US Series oils are NSF H1 registered and comply with FDA 21 CFR §178.3570 for lubricants intended for applications where incidental food contact may occur. They are Kosher approved and Halal certified and are manufactured in an ISO 21469-certified facility.
Product selection should be based on the compressor manufacturer's specifications, refrigerant, system design and operating conditions. Klüber Lubrication works with food processors and equipment manufacturers to identify the appropriate product and viscosity grade for each application.
“Rising energy costs continue to challenge food manufacturers, yet significant efficiency gains can often be achieved without replacing existing equipment,” says Karla Ruiz, business unit manager, Global Industrial Team - Food Industry, U.S. and Canada, Klüber Lubrication. “Lubrication is one area that is easy to overlook, though friction losses and oil carryover can have a measurable effect on equipment performance and energy use. By combining application expertise with a proven methodology, we help customers build a business case for change using measured operating data instead of assumptions.”
Looking for a reprint of this article?
From high-res PDFs to custom plaques, order your copy today!




