Used with highly abrasive products in pneumatic transfer applications, the IMI dual-door EP tube magnetic separator has a magnetic housing consisting of 2 door-mounted magnetic plates positioned on opposing sides of a stainless steel tube matching the existing diameter of the processing line to eliminate wear-points.
Equipped with CAN/CANopen and optionally with EtherCAT interfaces, the Technosoft iPOS3602 MX micro-sized, pluggable intelligent servo drive provides a flexible solution adapted to the decentralized control of any rotary or linear brushless, DC brush or step motor up to 75 W (36 V, 2 A).
Omega SCE-ELSSLPPL series of NEMA 4X electrical enclosures are engineered to house electrical and electronic controls, instruments and equipment in areas that may be regularly hosed down or are in very wet conditions.
Designed for industrial applications such as bottled water, USP and UPW water, food storage and processing, water recycling and grain treatment, the IN USA AC Series silent discharge ozone generator can produce more than 80g/hr. or 4.5 lbs./day of ozone with concentrations in excess of 200g/Nm3 or 14% w/w.
The NuTEC 720 all-hydraulic, microprocessor-controlled, multi-outlet forming machine runs up to 3,600 8-oz. patties on 5 1/2-in. paper per hour with the 1-hole mold. It can run up to 7,200 4-oz. patties on 4 3/4-in. paper per hour with the 2-hole setup.
Capable of attaining speeds up to 120 cpm, MULTI-FILL MFP volumetric pocket fillers are suitable for difficult-to-fill products, such as cooked rice and pastas (long and short goods), couscous, prepared salads, cut vegetables and fruit.
QC Industries AS40Z angled frame conveyors have a 1.95-in. high, rigid aluminum frame that resists twisting and a Z-Track design; optional V-guide belts are available to assist in tracking, especially in hard-to-reach applications.
Capable of resisting harsh chemicals, solvents, detergents and salt water, Stafford 316 stainless steel shaft collars and rigid shaft couplings come in 1- and 2-piece and set-screw styles with 18-8 or 316 stainless steel fasteners plus a variety of bore configurations.
Combining an HMI and PLC into one unit, the Maple Systems Human Machine Controller has a customizable I/O, and accepts up to 5 plug-in I/O modules with varying configurations of digital and analog inputs and outputs.
RSS