Used to clean birds with feathers on or feathers off, the Cantrell CBS-60 bird scrubber removes feces and other contaminants from the feathers or skin before processing.
Spee-Dee Packaging Machinery’s combination filling systems use one or more fillers to fill multiple ingredients into a single container on a vertical form/fill/seal machine.
The Low Headroom Material Master bulk bag discharger has a discharge spout closure system to stop material flow for partial bag discharge, allowing the bag to be retied and removed.
Designed for fresh and salt water processing, Hyde IBS stainless steel seafood processing blades have a honed edge and smooth Ra microfinish coating to reduce friction and the adhesion of fish and waste products during cuts.
The Low Headroom Material Master bulk bag discharger has a discharge spout closure system to stop material flow for partial bag discharge, allowing the bag to be retied and removed.
Tolomatic servo and stepper drives can be controlled from a PLC or master controller via 24VDC digital I/O, 0 to 10VDC or 4 to 20mA analog I/O, Ethernet or Modbus RTU over RS-485 (EtherNet/IP or Modbus TCP protocols).
Nanotec SC3518 series 2-phase hybrid stepper motors have a NEMA 14 35mm frame and a 1.8° step angle; depending on motor length, torque is between 0.18 and 0.32 Nm.
Designed to prevent product from being heated in pressure conveying systems, Xchanger AA heat exchangers use an aluminum plate-fin core with alternating finned flow channels to cool the conveying air close to ambient temperature.
RSS