Maintenance Strategies - Articles - Page 11

13th Annual Replacement Parts Survey

Replacement Parts Survey: Proactive inventory practices

Study shows processors are continuing to find solutions to reduce unscheduled downtime and improve operational excellence.

Debra Schug

July 10, 2015

Food Engineering’s 2015 Replacement Parts and Components Trends Survey identifies the “who, what, why and how” of replacement parts purchasing, inventory maintenance, condition monitoring and related topics.

Technology Sourcebook

Pneumatic torque wrenches

June 15, 2015

Enerpac CE-declared PTW-Series pneumatic torque wrenches provide high-speed, continuous rotation for constant torque output bolting applications.

Tech Update

Electrical systems and components: The lifeblood of your facility

Electrical systems and components run in the background, keeping your plant energized, but without maintenance and attention, things can go wrong.

Wayne Labs

June 5, 2015

From 2006 to 2010, 8,600 structure fires were reported at US industrial or manufacturing facilities, resulting in 11 fatalities, 230 injuries and $753 million in direct property damage, according to NFPA research.

Food Safety

Put positive pressure on facility airflows

Wayne Labs

March 5, 2015

Food at its most vulnerable point in the process is where your operation needs to be the cleanest.

Engineering R&D

Monitoring machine health 24/7

Wayne Labs

March 5, 2015

Process and packaging machine builders have been looking for ways to cut back on client support expenses.

Green Series

Stop the leaks before they stop your business

Wayne Labs

February 5, 2015

Leaks. They’re everywhere, and they’re insidious, sucking energy from your assets and robbing your bottom line.

Engineering R&D

Improving the mechanical properties of stainless steel for food and beverage applications

Wayne Labs

December 2, 2014

Extending the wear resistance of stainless steel (SS) components used in food manufacturing equipment operating on production lines lengthens replacement intervals and minimizes potential component failure, resulting in decreased downtime and improved cost savings—a long, sought-after goal of any maintenance department.

Field Reports

Brewery minimizes downtime with controls update

Two obsolete PLCs were replaced by a modern controller while the original I/O was kept, thanks to a new control network gateway.

October 7, 2014

Whether it’s football in the US or rugby in Great Britain, the two sports have one thing in common: Many of their spectators like beer.

Field Reports

Conveyor belting should be seen and not heard

When belting runs quietly, there’s little wear, and that means long life and very little downtime.

September 4, 2014

Table Talk Pies, located in Worcester, MA since 1938, makes those four-in. round pies that, if you live in the Northeast, you’ve probably have had the opportunity to try.

TECH FLASH

In automation, system availability is key

Machine operators expect efficiency, and for Big Drum Engineering, demand-oriented maintenance and fast troubleshooting through remote service are crucial

Jeremy Gerrard

July 29, 2014

Big Drum Engineering says an emphasis on quick, efficient maintenance and troubleshooting is required to ensure safety and security.