New Plant Products

RSS

Vi-Cas vacuum cups for ergonomic lifters assist with the moving and handling of large, heavy, bulky or unwieldy products.

The Tetra Pak high-shear mixer for cold emulsion products employs a 2-step process.

Winco chrome-plated GN 237 hinges are available with countersunk through holes or as threaded stud-type versions.

Suitable for processing powdery, fibrous or granular solids, as well as liquids and pastes, the Lodige Ploughshare Type KM 2000 continuous mixer is based on a mechanically generated, turbulent, fluidized bed process.

The ROSS Model PVM-1500 1,500-gal. multi-shaft mixer includes a lifting design that is a double-acting, fully hydraulic cylinder operating at a higher pressure.

The Delkor Performance Loader compact, mid-range servo-driven case packing system for rigid containers includes a pick-and-place gantry and an infeed system that loads up to 200 containers per min.

Carlo Gavazzi 3-phase RGC3 solid state relays can be panel mounted inside an electrical enclosure, or if a side-wall cutout is available, the heat sink portion can be mounted outside of the cabinet.

GEA S-Tec spiral freezers feature a control system that calibrates the freezer parameters through the measurement of the level of frozenness of the product at the freezer exit.

Available in 1-, 2- and 3-section models, Master-Bilt Fusion Series solid-door reach-in refrigerators are constructed of stainless steel.

The JBT LVS QuickDry system uses condensation cycles to remove all droplets of water from spiral freezers after defrosting and cleaning.