Designed for superheated or high-pressure steam mains, equipment and turbines up to 650psig and 800ºF, the TLV FS5H QuickTrap drainage trap provides rapid removal of condensate; the 3-point seating ensures a steam-tight seal even under no-load conditions.
Using visible and near-infrared wavelengths of light, the Endress+Hauser OUSAF11 absorption sensor is engineered for product loss detection, interface detection, and suspended solids and turbidity measurements.
The Smith Flow Control ISO-pattern IML intermediate lock with universal mount uses an operating key to lock the actuator in an open or closed position so the valve cannot turn.
The H.B. Fuller Liquamelt adhesive system bulk feed option eliminates the need for on-floor staff to refill the adhesive reservoir; it allows containers to be located remotely and for the adhesive to be safely transferred from the sealed containers to the packaging machines through common, non-heated fluid hoses.
The CTI hand-held, HID-compliant M20UxT-Nx-7P motion controller operates with a Windows Operating System, Mac OS X or Linux OS using a standard USB HID-compliant communication protocol.
Engineered for flexographic printing and packaging applications, the Kollmorgen AKD PDMM scalable automation platform combines a high-performance multi-axis motion controller, complete IEC61131-3 soft PLC, EtherCAT master and AKD servo drive in a single package.
A high-speed system that certifies each filter, the Excel XLERATOR hand dryer with HEPA filtration system meets stringent HEPA performance standards; it features a washable pre-filter and removes 99.97% of potentially present bacteria and particulates from the air in the room to deliver clean, filtered, purified air.
The Component Hardware Encore KLF-Y014 variable flow pre-rinse assembly allows users to select from 3 low-flow spray patterns and flow rates by rotating the unit’s bumper.
RSS