Model RDC-1530-SS is designed to de-lump bulk materials that have agglomerated or solidified during storage or shipment, returning products to their original particle sizes and flowability.

The Kason Flo-Thru model K40-1FT-SS sanitary sifter has a low-profile configuration that employs 2 unbalanced-weight gyratory motors mounted on opposing exterior sidewalls of the unit.

The Powder-Solutions MAG-RAM USDA Dairy-accepted self-cleaning grate magnet collects ferrous metal fragments.

Featuring a cantilevered shaft, the Kason CENTRI-SIFTER model XO-B centrifugal sifter scalps more than 100 tons/hr. of dry or moist powders or granular material.

The IEDCO inline vacuum sifter provides a fully automated, enclosed screening method while conveying powders or granules, which are introduced into the sifter through vacuum pressure and drawn through vibrating mesh screens and discharged back into the powder stream.

Custom-engineered for dust collection, particle classification and/or material recovery, Van Tongeren industrial cyclones separate dry particles from a stream of air or other gas.

The Eriez Xtreme vertical form/fill/seal metal detector can be used without a metal-free area above or below the sensing head.

The Eriez dust-tight, sanitary, convertible (DSC) grate in housing magnet is designed for ease of cleaning and contaminant removal.

Using vibratory motion to separate large from small chips, the tna roflo VMCS 3 chip sizer is suitable for a range of fried snack products.

The Eriez DSC dust-tight, sanitary, convertible grate-in-housing magnet handles fine powders and some head velocity pressure while maintaining a positive seal.